Bond Strength of Lap-Spliced Bars in Concrete Confined with Composite Jackets
- 1 April 2011
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 15 (2) , 156-167
Abstract
The effectiveness of fiber-reinforced polymer (FRP) and textile-reinforced mortar (TRM) jackets was investigated experimentally and analytically in this study to confine old-type reinforced concrete (RC) columns with limited capacity because of bond failure at lap-splice regions. The local bond strength between lap-spliced bars and concrete was measured experimentally along the lap-splice region of six full-scale RC columns subjected to cyclic uniaxial flexure under constant axial load. The bond strength of the two column specimens tested without retrofitting was found to be in good agreement with the predictions given by two existing bond models. These models were modified to account for the contribution of composite material jacketing to the bond resistance between lap-spliced bars and concrete. The effectiveness of FRP and TRM jackets against splitting at lap splices was quantified as a function of jacket properties and geometry as well as in terms of the jacket effective strain, which was found to depend on the ratio of lap-splice length to bar diameter. Consequently, simple equations for calculating the bond strength of lap splices in members confined with composite materials (FRP or TRM) are proposed.Keywords
This publication has 11 references indexed in Scilit:
- Retrofitting of Rectangular Columns with Deficient Lap SplicesJournal of Composites for Construction, 2010
- Textile-Reinforced Mortar versus FRP Jacketing in Seismic Retrofitting of RC Columns with Continuous or Lap-Spliced Deformed BarsJournal of Composites for Construction, 2009
- Hysteretic Behavior of Bridge Columns with FRP-Jacketed Lap Splices Designed for Moderate Ductility EnhancementJournal of Composites for Construction, 2007
- Seismic Retrofitting of Columns with Lap Spliced Smooth Bars Through FRP or Concrete JacketsJournal of Earthquake Engineering, 2007
- Comparison of Roles of FRP Sheets, Stirrups, and Steel Fibers in Confining Bond Critical RegionsJournal of Composites for Construction, 2006
- Behavior of Gravity Load-Designed Rectangular Concrete Columns Confined with Fiber Reinforced Polymer SheetsJournal of Composites for Construction, 2005
- Full-scale testing of a parking structure column retrofitted with carbon fiber reinforced compositesConstruction and Building Materials, 2000
- Seismic Retrofit and Repair of Circular Bridge Columns with Advanced Composite MaterialsEarthquake Spectra, 1999
- Seismic Retrofit of RC Columns with Continuous Carbon Fiber JacketsJournal of Composites for Construction, 1997
- 7. Seismic Retrofitting of Rectangular Bridge Columns with Composite StrapsEarthquake Spectra, 1997