3D Printing and Mechanical Properties of Polyamide Products with Schwartz Primitive Topology
- 1 February 2020
- journal article
- research article
- Published by Pleiades Publishing Ltd in Technical Physics
- Vol. 65 (2) , 211-215
Abstract
The results of a study of the mechanical properties of the honeycomb material made of polyamide-12, which consists of structural elements that repeat in three directions and have Schwartz primitive geometry, are presented. Samples in the form of a cube (size 30 × 30 × 30 mm) are obtained by layer-by-layer sintering of powder material on a 3D printer of selective laser sintering (SLS) type. Compression tests of samples with various geometry show that the strength of the samples increases with a decrease in the characteristic size of the repeating structural element. According to the calculations performed by the finite element method, this is caused by an increase in the dangerous sectional area. The possibility of a significant increase in the specific strength of the material while maintaining its density is shown.Keywords
This publication has 8 references indexed in Scilit:
- Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element studyMaterials & Design, 2019
- Mechanical properties of energy-absorbing structures with triply periodic minimal surface topologyActa Astronautica, 2018
- Physicomechanical Properties of a Model Material in the Form of a Cube with the Topology of Triply Periodic Minimal Surfaces of the Gyroid TypeTechnical Physics, 2018
- Ceramic Materials with the Triply Periodic Minimal Surface for Constructions Functioning under Conditions of Extreme LoadsGlass Physics and Chemistry, 2017
- Polymer Structures with the Topology of Triply Periodic Minimal SurfacesGlass Physics and Chemistry, 2017
- Mechanical properties of 3D printed polymeric cellular materials with triply periodic minimal surface architecturesMaterials & Design, 2017
- Micro-Structured Two-Component 3D Metamaterials with Negative Thermal-Expansion Coefficient from Positive ConstituentsScientific Reports, 2017
- Nylon-12-Preparation, Properties, and ApplicationsIndustrial & Engineering Chemistry, 1970