An Integrated OpenMC–COMSOL Approach for Preliminary Design and Safety Assessment of Thorium-Based Small Modular Reactors
Preprint
- 16 November 2026
- preprint
- Published by MDPI AG in Preprints.org
Abstract
The growing interest in small modular reactors (SMRs) has created a demand for computational methodologies capable of assessing reactor performance and safety-related behavior during the early stages of design. In this study, reactor thermal-power conditions of 60, 90, and 120 MWth were selected to investigate power-dependent thermal-hydraulic and thermomechanical responses of a thorium-based pressurized water reactor (PWR) fuel rod within a range relevant to low-power SMR concepts. Increasing heat generation and heating time resulted in progressively higher fuel temperatures and stronger mechanical responses. At 536 MW m⁻³ heat flux, the calculated fuel temperature after 10 s exceeded the 1400 °C temperature criterion adopted in the computational assessment. The coolant velocity remained approximately 0.9–1.0 m s⁻¹ over most of the modeled channel. The maximum reported cladding displacement reached approximately 2.2*10-4 m, while the von Mises stress at 10 s increased from approximately 210 MPa at 268 MW m⁻³ to 300 MPa at 536 MW m⁻³. By integrating OpenMC neutron-transport calculations with transient COMSOL Multiphysics simulations, the proposed sequential coupling methodology provides a means of evaluating how fuel driven heat flux influences local heat generation, fuel and clad temperature, coolant behavior, and structural loading. Such an approach could support the preliminary development and comparative evaluation of thorium-fueled SMR configurations, particularly by identifying highly loaded fuel rods and potentially demanding operating conditions before detailed engineering design and experimental validation.Keywords
All Related Versions
This publication has 20 references indexed in Scilit:
- Comsol-based nuclear-thermal coupling methodology and its application in microreactorsAnnals of Nuclear Energy, 2026
- Investigating thermal and mechanical behavior for two thorium fuel types in a PWRAnnals of Nuclear Energy, 2025
- Thorium fuel revisitedProgress in Nuclear Energy, 2023
- Ensuring the possibility of using thorium as a fuel in a pressurized water reactor (PWR)Nuclear Science and Techniques, 2021
- OpenMC: A state-of-the-art Monte Carlo code for research and developmentAnnals of Nuclear Energy, 2015
- Temperature increase of Zircaloy-4 cladding tubes due to plastic heat dissipation during tensile tests at 0.1–10 s−1 strain ratesJournal of Nuclear Materials, 2014
- Coupled neutronics/thermal hydraulics evaluation for thorium based fuels in thermal spectrum SCWRProgress in Nuclear Energy, 2013
- A multi-physics time-dependent model for the Lead Fast Reactor single-channel analysisNuclear Engineering and Design, 2013
- Multidimensional multiphysics simulation of nuclear fuel behaviorJournal of Nuclear Materials, 2012
- Tensile properties of Zircaloy-4Journal of Nuclear Materials, 1977