Investigation of In Situ Soil Density Change by Resistivity Measurements
- 29 March 2012
- conference paper
- Published by American Society of Civil Engineers (ASCE)
- p. 2590-2598
Abstract
Additional in-situ measurements during piezocone penetration tests can provide important information at a low cost due to recent advances in measurement technology. Resistivity measurements, commonly used in geophysical measurements, can be adapted to a standard piezocone penetration test (CPTU) to supply data about the in-situ properties of the soil. Change in soil density in extensive sand layers can therefore be determined. A series of laboratory multi-frequency AC resistivity tests with a novel electrode configuration have been performed with a model probe to investigate possibilities of in-situ measurement of volumetric properties of sand in a controlled saturated sand sample. The results show that soil density change of saturated sand can be measured efficiently and with relative accuracy with resistivity measurements at multiple frequencies. A measurement frequency spectrum of 100 Hz to 100 kHz is recommended for in-situ tests.Keywords
This publication has 10 references indexed in Scilit:
- Void Ratio Estimation of Soft Soils Using Electrical Resistivity Cone ProbeJournal of Geotechnical and Geoenvironmental Engineering, 2011
- Development of a Microcontroller-Based Frequency Synthesizer cum Vector VoltmeterIEEE Sensors Journal, 2010
- In Situ Testing in Geomechanics2008
- Evaluation of Relative Density and Shear Strength of Sands from CPT and DMT2003
- Development of a CPT deployed probe forin situ measurement of volumetric soil moisture content and electrical resistivityField Analytical Chemistry & Technology, 1998
- Frequency-Domain Analysis of Electrical Dispersion of SoilsJournal of Geotechnical Engineering, 1995
- Tests on Model Instrumented Grouted Piles in Offshore Calcareous SoilJournal of Geotechnical Engineering, 1991
- Development and use of an electrical resistivity cone for groundwater contamination studiesCanadian Geotechnical Journal, 1990
- Soil classification using the cone penetration testCanadian Geotechnical Journal, 1990
- A state parameter for sandsGéotechnique, 1985