Urea Delays High-Temperature Crosslinking of Polyacrylamide for in Situ Preparation of an Organic/Inorganic Composite Gel
Preprint
- 20 February 2025
- preprint
- Published by MDPI AG in Preprints.org
Abstract
To address the rapid crosslinking reaction and short stability duration of polyacrylamide gel under high salinity and temperature conditions, this paper proposes the use of urea to delay the nucleophilic substitution crosslinking reaction among polyacrylamide, hydroquinone, and formaldehyde. At the same time, urea also regulates the precipitation of calcium and magnesium ions, enabling the in situ preparation of an organic/inorganic composite gel of crosslinked polyacrylamide and carbonate particles. With calcium and magnesium ion concentrations at 6817 mg/L and total salinity at 15×104 mg/L, the gelation time can be controlled to range from 6.6 to 14.1 days at 95 °C and from 2.9 to 6.5 days at 120 °C. The corresponding composite gel can remain stable for up to 155 days and 135 days, respectively. The delayed gelation facilitates longer-distance diffusion of the gelling agent into the formation, and the enhancements in gel strength and stability provide a solid foundation for improving the effectiveness of profile control and water shut-off in oilfields. This innovative approach promotes the comprehensive utilization of mineral resources within the formation.Keywords
All Related Versions
- Version 1, 2025-02-20, Preprints
- Published version: Gels, 11 (4), 256.
This publication has 65 references indexed in Scilit:
- Water Control with Gels Based on Synthetic Polymers under Extreme Conditions in Oil WellsChemical Engineering & Technology, 2022
- Effect of the nanoparticles in the stability of hydrolyzed polyacrylamide/resorcinol/formaldehyde gel systems for water shut‐off/conformance control applicationsJournal of Applied Polymer Science, 2019
- In situ organically cross‐linked polymer gel for high‐temperature reservoir conformance control: A reviewPolymers for Advanced Technologies, 2018
- Experimental research of hydroquinone (HQ)/hexamethylene tetramine (HMTA) gel for water plugging treatments in high‐temperature and high‐salinity reservoirsJournal of Applied Polymer Science, 2016
- Study on strength and gelation time of polyacrylamide/polyethyleneimine composite gels reinforced with coal fly ash for water shut‐off treatmentJournal of Applied Polymer Science, 2014
- New insights into phenol–formaldehyde‐based gel systems with ammonium salt for low‐temperature reservoirsJournal of Applied Polymer Science, 2014
- Evaluation of a nanocomposite hydrogel for water shut‐off in enhanced oil recovery applications: Design, synthesis, and characterizationJournal of Applied Polymer Science, 2012
- Thermal behavior and morphological properties of novel magnesium salt–polyacrylamide composite polymersPolymer Composites, 2011
- pH sensitivity and swelling behavior of partially hydrolyzed formaldehyde‐crosslinked poly(acrylamide) superabsorbent hydrogelsJournal of Applied Polymer Science, 2008
- Preparation and characterization of nanocomposite hydrogels based on polyacrylamide for enhanced oil recovery applicationsJournal of Applied Polymer Science, 2006