The effects of rail coatings on melt-wave erosion in block armatures
Authors:
- 1 November 2012
- journal article
- research article
- Published by SAGE Publications in International Journal of Applied Electromagnetics and Mechanics
- Vol. 40 (4) , 323-331
Abstract
In this paper we investigate the influence of different rail coatings on melt-wave erosion (MWE) in block armatures. A two-dimensional numerical model is developed and the finite difference method is used to simulate the transient evolution of MWE. The results of numerical calculations show a local concentration of current and joule heating at the interface, and MWE occurs at the trailing corner of the block armature. Five different pure metals are used as the rail coatings to improve the launching performance of the railgun. Important electrical parameters of coatings are analyzed through comparing the axial erosion distance and the vertical gap thickness. It is observed that the coating materials with a higher electrical conductivity than that of rail material are helpful to delay the spread of MWE. The results are inspiring and contribute to apply the rail coatings to solid-armature railguns.Keywords
This publication has 15 references indexed in Scilit:
- Three-dimensional investigation of velocity skin effect in U-shaped solid armatureProgress in Natural Science: Materials International, 2008
- Experiments With Armature Contact CladdingsIEEE Transactions on Magnetics, 2006
- Analysis of rail surfaces from a multishot railgunIEEE Transactions on Magnetics, 2005
- The effect of current and speed on perimeter erosion in recovered armaturesIEEE Transactions on Magnetics, 2005
- Numerical modeling of melt-wave erosion in two-dimensional block armaturesIEEE Transactions on Magnetics, 2005
- A survey of armature transition mechanismsIEEE Transactions on Magnetics, 2003
- Experiments to measure melt-wave erosion in railgun armaturesIEEE Transactions on Magnetics, 2003
- Why solid armatures fail and how they can be improvedIEEE Transactions on Magnetics, 2003
- Electrodynamics of the current melt-wave erosion boundary in a conducting half-spaceIEEE Transactions on Magnetics, 2003
- Numerical modeling of melt-wave erosion in conductors [railgun armatures]IEEE Transactions on Magnetics, 2003