Recent advancement on thermal management strategies in PEM fuel cell stack: a technical assessment from the context of fuel cell electric vehicle application
- 20 April 2022
- journal article
- other
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 44 (2) , 3100-3125
Abstract
Effective thermal management strategy for the polymer electrolyte membrane fuel cell (PEMFC) stack is critical in maintaining the overall stack efficiency and durability. The present assessment critically explores the recent developments (predominantly last decade) in thermal management strategies of PEMFCs, which encompasses an in-depth analysis of the thermodynamics, corresponding effects on components of PEMFC and the waste heat recovery system. In general, the operating temperature range of a PEMFC is 60–80°C. Entropy consequence and irreversible transport mechanisms of the reactants are the major contributions to heat generation. Air cooling is employed for compact stacks of less than 5 kW and water cooling is favored for stacks greater than 5 kW. Cooling using nanofluids enables better cooling efficiency than water while downsizing the size and weight of the system. Phase change cooling strategy to attain greater heat removal capacity is broadly employed for stacks greater than 10 kW, which is beneficial in a compact size of the cooling system contrasted to the water cooling system. Passive cooling methods employing vapor chamber, heat pipes and heat spreaders used were another cooling system for stack power ranges between 5 and 10 kW which have the benefit of reduced parasitic losses. In addition to thermal management strategies, integral challenges associated with each thermal management strategy is identified. Discussion on cold start thermal management of fuel cell electric vehicles was provided. Finally, the waste heat recovery system of energy efficiency and overall future prospectus for the betterment of thermal management of PEMFC is emphasized.Keywords
This publication has 152 references indexed in Scilit:
- Fuel Cell Perfluorinated Sulfonic Acid Membrane Degradation Correlating Accelerated Stress Testing and LifetimeChemical Reviews, 2012
- A combined capillary cooling system for fuel cellsApplied Thermal Engineering, 2012
- Carbon Nanotube-Based Materials for Fuel Cell ApplicationsAustralian Journal of Chemistry, 2012
- Model based design and test of cooling plates for an air-cooled polymer electrolyte fuel cell stackInternational Journal of Hydrogen Energy, 2011
- Thermal management of a proton exchange membrane fuel cell stack with pyrolytic graphite sheets and fans combinedInternational Journal of Hydrogen Energy, 2011
- Numerical Investigation of Liquid Water Cooling for a Proton Exchange Membrane Fuel Cell StackHeat Transfer Engineering, 2011
- Maximum equivalent efficiency and power output of a PEM fuel cell/refrigeration cycle hybrid systemInternational Journal of Hydrogen Energy, 2011
- Theoretical efficiency limits for energy conversion devicesEnergy, 2010
- Cold start of polymer electrolyte fuel cells: Three-stage startup characterizationElectrochimica Acta, 2010
- Fundamental Research Needs in Combined Water and Thermal Management Within a Proton Exchange Membrane Fuel Cell Stack Under Normal and Cold-Start ConditionsJournal of Fuel Cell Science and Technology, 2009