Near-Field Wireless Power Transfer to Stent-Based Biomedical Implants
- 4 May 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 2 (3) , 193-200
Abstract
Safe wireless power transfer is an essential requirement for biomedical implants. Emerging technologies are becoming smaller, less invasive, and consume less power. Moreover, stent-based devices are being recognized as a minimally invasive alternative to traditional surgery. Hence, the idea of using the body of the stent as the power receiving element is becoming increasingly attractive. The objective of this paper is to analyze two near-field wireless power transfer methods to stent-based devices, viz., inductive and capacitive coupling. The methods used are lumped element modeling, ac circuit theory, finite-element analysis, experiments with excised bovine muscle tissue, and a live ovine vascular model. Capacitive coupling is proposed as an alternate method due to the transmitter design that can be worn anywhere on the body. It achieves power transfer efficiencies of 2.6% and 1% when placed at depths in muscle tissue of 15 mm and 30 mm, respectively. Safety requirements are also met. The capacitive link can accept an input power of 53 mW before exceeding the safe specific absorption rate limit of 1.6 W/kg averaged over 1 g of tissue.Keywords
Funding Information
- Australian Research Council (LP150100038)
- National Health and Medical Research Council (APP1062352)
- Westpac Bicentennial Research
- National Health and Medical (GNT110171)
This publication has 22 references indexed in Scilit:
- Bioresorbable Electronic Stent Integrated with Therapeutic Nanoparticles for Endovascular DiseasesACS Nano, 2015
- Implantable Flexible Pressure Measurement System Based on Inductive CouplingIEEE Transactions on Biomedical Engineering, 2014
- Intelligent telemetric stent for wireless monitoring of intravascular pressure and its in vivo testingBiomedical Microdevices, 2014
- Design of a Miniaturized Wireless Blood Pressure Sensing Interface Using Capacitive CouplingIEEE/ASME Transactions on Mechatronics, 2014
- Single-chip CMUT-on-CMOS front-end system for real-time volumetric IVUS and ICE imagingIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2014
- Inductive antenna stent: design, fabrication and characterizationJournal of Micromechanics and Microengineering, 2013
- Dielectric properties of porcine glands, gonads and body fluidsPhysics in Medicine & Biology, 2012
- Maximum Achievable Efficiency in Near-Field Coupled Power-Transfer SystemsIEEE Transactions on Biomedical Circuits and Systems, 2012
- In situ and ex vivo evaluation of a wireless magnetoelastic biliary stent monitoring systemBiomedical Microdevices, 2010
- Micromachined Antenna Stents and Cuffs for Monitoring Intraluminal Pressure and FlowJournal of Microelectromechanical Systems, 2006