The possibility of using ferritization precipitates obtained from the processing of spent process solutions from electroplating operations as magnetic sorbents for the removal of Fe²⁺ ions from rinse wastewater was investigated. Precipitate samples with different phase compositions were studied: Fe₃O₄; ZnFe₂O₄; NiFe₂O₄ + NiFe(OH)O; CuFe₂O₄ + CuO; and CoFe₂O₄. The phase composition of the ferritization precipitates was determined by X-ray diffractometry. Ion concentrations in solution were determined by spectrophotometry. The experiments were carried out under batch conditions at initial Fe²⁺ concentrations from 2.0 to 120.0 mg/dm³ and a sorbent dose of 1.2 g/dm³. At initial concentrations up to 20 mg/dm³, most samples achieved 82.1–99.8 % removal of iron ions. At higher concentrations, the nickel- and copper-containing precipitates showed the highest removal efficiencies. The maximum sorption capacity of 99.8 mg/g, with a removal efficiency of 99.8 % at an initial ion concentration of 120 mg/dm³, was achieved by the sample containing 56.08 % CuFe₂O₄ and 43.92 % CuO. A sorption-activity ranking of the samples was proposed. The sorption capacities of the best-performing samples were comparable to those of a number of synthetic magnetic sorbents. The obtained results confirm the feasibility of using ferritization precipitates as sorption materials for the treatment of iron-containing rinse wastewater and for the further treatment of concentrated wastewater.