Influence of Heat Treatment Duration on the Machinability of Beech Wood (Fagus sylvatica L.) by Planing
Authors:
Open Access
- 2 February 2017
- journal article
- Published by BioResources in BioResources
- Vol. 12 (2) , 2780-2791
Abstract
The comparative behavior of heat-treated and untreated beech wood (Fagus sylvatica L.) were studied in response to planing. Beech wood samples were heat-treated in an electric oven without air circulation, at atmospheric pressure, at 200 °C for 1, 2, 3, 4, 5, or 6 h. After conditioning, both the heat-treated samples and the untreated controls were planed at a rotation speed (n) of 4567 rpm and a feed speed (u) of 10 m/min via a “silent power” cylindrical cutter. The cutting power was measured during machining by a Vellemann DAQ board. After processing, the surface quality was measured along and across the cutting direction with a stylus MarSurf XT20 instrument, and the processing roughness was assessed by the roughness parameter Rk. The influence of the heat-treating duration upon the cutting power and the processing roughness were analyzed and correlated to the mass loss after the heat treatment. Linear regression functions were generated for both of the correlations.Keywords
This publication has 10 references indexed in Scilit:
- Removing deep valleys in roughness measurement of soft and natural materials with mathematical filteringCiência & Engenharia, 2017
- Influence of Heat Treatment Duration on the Machinability of Beech Wood (Fagus sylvatica L.) by PlaningBioResources, 2017
- Effect of Thermal Treatment on the Surface Roughness of Scots Pine (Pinus sylvestris L.) Wood after Plane MillingBioResources, 2016
- Factors Affecting the Consumption of Energy during the Milling of Thermally Modified and Unmodified Beech WoodBioResources, 2015
- Effect of Thermal Treatment on Surface Quality of Beech Wood after Plane MillingBioResources, 2015
- Determination of the Surface Roughness of Heat-Treated Wood Materials Planed by the Cutters of a Horizontal Milling MachineBioResources, 2013
- Thermo-vacuum modification of spruce (Picea abies Karst.) and fir (Abies alba Mill.) woodBioResources, 2012
- Roughness models for sanded wood surfacesWood Science and Technology, 2010
- Evaluation of surface smoothness by laser displacement sensor 1: effect of wood speciesJournal of Wood Science, 2003
- Qualitätskriterien für geschliffene MassivholzoberflächenEuropean Journal of Wood and Wood Products, 1993