Infrared‐Transparent Y 2 O 3 –MgO Nanocomposites Fabricated by the Glucose Sol–Gel Combustion and Hot‐Pressing Technique
- 13 June 2015
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 98 (9) , 2796-2802
Abstract
A glucose sol–gel combustion method has been developed to synthesize composite nanopowders with equal volume fractions of Y 2 O 3 and MgO. The synthesis involves the generation of precursor foam containing Y 3+ and Mg 2+ cations via the chemical and thermal degradation of glucose molecules in aqueous solutions. Subsequent calcination of the foam gave the composite nanopowders uniform composition and surface areas of 44–62 m 2 /g depending on the relative amount of glucose. Then the nanopowder with an average particle size of 19 nm was consolidated by the hot‐pressing technique with different sintering temperatures. The fabricated nanocomposite is mid‐infrared transparent as the result of fine grains, narrow grain size distribution, and uniform phase domains. The transmittance increases with increase in the sintering temperature and reaches 83.5% at 3–5 μm mid‐infrared wave range once the temperature reaches 1350°C, which is close to the theoretical value of 85%. And it is noteworthy that the cutoff wavelength reaches 9.6 μm, which is superior to those of spinel, AlON, and sapphire. And the Vickers hardness of the sample reaches 10.0 ± 0.1 GPa, which is significantly higher than those of the coarse grained single‐phase MgO and Y 2 O 3 . The results indicate that the glucose sol–gel combustion and hot‐pressing technique is an effective method to fabricate infrared transparent Y 2 O 3 –MgO nanocomposites.Keywords
Funding Information
- Major program of National natural science foundation of China (50990301)
- Project for Young Scientists Fund of National Natural Science Foundation of China (51002172, 51302298)
This publication has 31 references indexed in Scilit:
- Y2O3–MgO–ZrO2 Infrared Transparent Ceramic NanocompositesJournal of the American Ceramic Society, 2011
- Synthesis of nanocrystalline LaFeO3 powders via glucose sol–gel routeMaterials Chemistry and Physics, 2011
- Phase Homogeneity in Y 2 O 3 – MgO Nanocomposites Synthesized by Thermal Decomposition of Nitrate Precursors with Ammonium Acetate AdditionsJournal of the American Ceramic Society, 2011
- A Foaming Esterification Sol–Gel Route for the Synthesis of Magnesia–Yttria NanocompositesJournal of the American Ceramic Society, 2011
- Infrared‐Transparent Y 2 O 3 –MgO Nanocomposites Using Sol–Gel Combustion Synthesized PowderJournal of the American Ceramic Society, 2010
- Spark Plasma Sintering of an Infrared‐Transparent Y 2 O 3 –MgO NanocompositeJournal of the American Ceramic Society, 2009
- Chemical Routes in the Synthesis of Nanomaterials Using the Sol–Gel ProcessAccounts of Chemical Research, 2007
- Sonochemical synthesis of nanocrystalline LaFeO3Journal of Materials Chemistry, 2003
- A rapid method to prepare crystalline fine particle chromite powdersMaterials Letters, 1992
- Thermal decomposition of (Sr, Ti) organic precursors during the Pechini processJournal of Materials Science, 1990