Structure optimization of turbocharger air-to-air intercooler for an air-cooled engine based on porous-media-model
- 9 August 2025
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (6) , 3407-3420
Abstract
Enhancing the flow and heat-transfer performances of the turbocharger intercooler can improve the overall performance of vehicle engines. Given the immense quantity of grids involved, numerically simulating the full-scale model of intercoolers becomes infeasible. Currently, most of the existing simulations and optimizations of intercoolers are based on the local fin model. A few studies try to employ the porous-media-model to investigate full-scale intercoolers, but they usually focus on water-to-air intercoolers. The applicability of the porous-media-model for full-scale air-to-air intercoolers simulation and optimization still needs further verification. Hence, it is urgent to explore efficient numerical simulation and optimization method for the full-scale air-to-air intercooler. Based on the porous-media-model, this study proposes an efficient numerical simulation method of the full-scale air-to-air intercooler. And it is validated by the air-cooled diesel engine bench test. The mean relative errors of the hot-side pressure-drop and the outlet temperature are 4.28% and 1.52% respectively. Then, on the basis of the efficient numerical simulation method, the optimal-Latin-hypercube sampling method, the general regression neural network (GRNN) surrogate model, and the multi-objective genetic algorithm (GA) are further combined to construct an optimization method of the full-scale intercooler. The optimization method is able to decrease the hot-side pressure-drop of the intercooler by 6.83% and maintain the heat-transfer performance. Finally, the flow mechanisms of performances improvement of the optimized intercooler are analyzed.Keywords
Funding Information
- Tianjin Municipal Science and Technology Program (24ZXZSSS00130)
- National Natural Science Foundation of China (12472238)
- National Natural Science Foundation of China (12472294)
- Tianjin Municipal Education Commission Research Project (2023KJ205)
This publication has 27 references indexed in Scilit:
- GRNN-based cascade ensemble model for non-destructive damage state identification: small data approachEngineering with Computers, 2024
- Structure optimization of intercooler bionic fins based on artificial neural network and genetic algorithmsEnergy, 2024
- Parallel turbochargers for small-scale power generationApplied Thermal Engineering, 2023
- Theoretical and experimental study on performance improvement of diesel engines at different altitudes by adaptive regulation method of the two-stage turbocharging systemEnergy, 2023
- A comprehensive survey on NSGA-II for multi-objective optimization and applicationsArtificial Intelligence Review, 2023
- Experimental investigation of combustion characteristics analysis and optimization during the turbocharging mode switching process of diesel engine with advanced turbocharging systemApplied Thermal Engineering, 2023
- Effective Forchheimer Coefficient for Layered Porous MediaTransport in Porous Media, 2022
- Application of the Dupuit–Forchheimer model to groundwater flow into a wellModeling Earth Systems and Environment, 2021
- Simulation and experimental investigation of the wavy fin-and-tube intercoolerCase Studies in Thermal Engineering, 2016
- Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approachComputers & Chemical Engineering, 2014