Deposited Nanoparticles Can Promote Air Clogging of Piezoelectric Inkjet Printhead Nozzles
Authors:
- Yuanhua LiYLYuanhua Li
- Omar DahhanODOmar Dahhan
- Carlos D. M. FilipeCFCarlos D. M. Filipe
- John D. BrennanJBJohn D. Brennan
- Robert H. PeltonRPRobert H. Pelton
- 29 March 2019
- journal article
- research article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 35 (16) , 5517-5524
Abstract
Piezoelectric inkjet printing is susceptible to printhead clogging when printing with inks that contain dispersed particles. This paper investigates the mechanisms by which 28 to 530 nm nanoparticle dispersions induce printhead clogging without forming large aggregates or thick deposited layers on printhead surfaces. Printing experiments were combined with nanoparticle deposition studies and with experiments where inks were pumped through printheads at a constant flow rate with a syringe pump. Sub-monolayer coverages of hydrophobic cationic polystyrene nanoparticles adhering to printhead surfaces promote rapid clogging by trapped air that enters from the nozzle opening. We propose that the deposited particles distort the shape of the ink/air meniscus possibly causing air entrainment, and promote air bubble adhesion to the interior printhead surfaces. The printer’s purge-blot cleaning procedure removes air clogs but clogs quickly reform when printing is resumed because the adsorbed nanoparticles are not removed by the cleaning procedure. Non-depositing anionic hydrophobic nanoparticles give much less clogging, possibly due to filtration of trace large aggregates. Colloidal stability is a necessary but not sufficient criterion for ink dispersions; the ink particles must not adsorb onto printhead surfaces. Thus, alternate surface chemistries for printhead and ink particle surfaces may be required to print hydrophobic ink materialsKeywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada
- China Scholarship Council
This publication has 23 references indexed in Scilit:
- Optimization of Experimental Parameters to Suppress Nozzle Clogging in Inkjet PrintingIndustrial & Engineering Chemistry Research, 2012
- Nanoparticle Flotation Collectors II: The Role of Nanoparticle HydrophobicityLangmuir, 2011
- Nanoparticle Flotation Collectors: Mechanisms Behind a New TechnologyLangmuir, 2011
- The dynamics of the piezo inkjet printhead operation☆Physics Reports, 2010
- Deposition of particles from polydisperse suspensions in microfluidic systemsMicrofluidics and Nanofluidics, 2010
- Bioactive paper provides a low-cost platform for diagnosticsTrAC Trends in Analytical Chemistry, 2009
- Effects of trapped air bubbles on frequency responses of the piezo-driven inkjet printheads and visualization of the bubbles using synchrotron X-raySensors and Actuators A: Physical, 2009
- Mechanism for clogging of microchannelsPhysical Review E, 2006
- On flow-blocking particle structures in microtubesMicrofluidics and Nanofluidics, 2005
- Slow viscous motion of a sphere parallel to a plane wall—II Couette flowChemical Engineering Science, 1967