Target identification performance as a function of low spatial frequency image content
Authors:
- 1 September 2000
- journal article
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 39 (9) , 2458-2462
Abstract
Current imaging system performance models use either the minimum resolvable temperature difference or the minimum resolvable contrast concepts to predict target identification performance. Both of these performance functions describe the limiting frequency that can be viewed through the imaging system at a particular contrast. No credit is given to the system for the amount of low frequency (lower than the limiting frequency) information that is passed through the system. We determine whether the low spatial frequency information is important in the target identification task. Previous experiments show that no degradation is seen on character recognition if a high-pass, edge enhancing filter is applied to character images. This is not the case in target identification performance, where the targets of interest are military tanks. A number of filters (six levels of blur at four bandwidth configurations) are applied to tank imagery including high-pass filters to reduce the low frequency image content. A perception experiment is performed to determine whether target identification performance was degraded with a reduced amount of low spatial frequency image content. The probability of target identification is calculated from the observer responses and the identification performance is evaluated as a function of low spatial frequency image content. Low frequency information is shown to contribute to the overall system performance.Keywords
This publication has 10 references indexed in Scilit:
- Analysis of Sampled Imaging Systems2000
- Sampled imaging sensor design using the MTF squeeze model to characterize spurious response1999
- Influence of sampling on target recognition and identificationOptical Engineering, 1999
- Incorporating the entire modulation transfer function into an infrared target acquisition modelInfrared Physics & Technology, 1998
- Target acquisition modeling for contrast-limited imaging: effects of atmospheric blur and image restorationJournal of the Optical Society of America A, 1995
- Numerical methods for computing modulation transfer-function areaDisplays, 1991
- MTFA as a measure for computer display screen image qualityDisplays, 1990
- Minimum Resolvable and Minimum Detectable Contrast Prediction for Monochrome Solid-State ImagersSMPTE Journal, 1987
- Thermal Imaging Systems1975
- Electrooptical System Evaluation1971