Fatigue strength for friction stir welding of semi-solid 5083 aluminum alloy
Open Access
- 1 January 2023
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2743 (1)
Abstract
The purpose of this study was to examine the fatigue strength for friction stir welding (FSW) of the semi-solid metal (SSM) 5083 aluminum alloy. The thickness was 6 mm using butt joints. The parameters of the FSW process, the rotational speed of 1200 rpm, welding speed of 10 mm/min, and threaded cylindrical tool profile were tested. The fatigue tests by using the Static and Dynamic Testing Machine, frequency of 20 Hz, the stress ratio of R=−1. Adjust the stroke value to achieve six stress amplitude levels of 0.9, 0.8, 0.7, 0.6, 0.5 and 0.4 mm. A fatigue limit for the FSW and the base metal (BM) of over 3×106 cycles. The results revealed stroke levels at the same level had stress amplitude, and the number of cycles at each level between the FSW and the BM was similar. The endurance limits of the FSW and the BM of 48.501 MPa and 46.569 MPa respectively.Keywords
This publication has 13 references indexed in Scilit:
- Fatigue and Fracture Behaviours of FSW and FSP Joints of AA5083-H111 Aluminium AlloyIOP Conference Series: Materials Science and Engineering, 2018
- Fatigue life investigation of UIC 54 rail profile for high speed railJournal of Physics: Conference Series, 2017
- Fatigue Strength Estimation Based on Local Mechanical Properties for Aluminum Alloy FSW JointsMaterials, 2017
- Producing of AA5083/ZrO2 Nanocomposite by Friction Stir Processing (FSP)Metallurgical and Materials Transactions B, 2013
- General relation between tensile strength and fatigue strength of metallic materialsMaterials Science and Engineering: A, 2013
- Research and development of gas induced semi-solid process for industrial applicationsTransactions of Nonferrous Metals Society of China, 2010
- Friction stir welding and processingMaterials Science and Engineering: R: Reports, 2005
- Hall–Petch relationship in friction stir welds of equal channel angular-pressed aluminium alloysMaterials Science and Engineering: A, 2003
- Effects of Nonmetallic Inclusions on Fatigue Strength2002
- Weldability of High Strength Aluminum Alloys by Friction Stir WeldingISIJ International, 2000