Effect of fast neutron irradiation on the structural and optical properties of Makrofol DE 1-1 CC polycarbonate
Authors:
- 4 June 2010
- journal article
- research article
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- Vol. 165 (11) , 845-856
Abstract
Samples from sheets of the polymeric material Makrofol DE 1-1 CC have been exposed to neutrons of incident energy in the range of 0.8–19.2 MeV. The modifications induced in Makrofol samples due to neutron irradiation have been studied through different characterization techniques such as X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, intrinsic viscosity, refractive index and color difference studies. Infrared spectroscopy indicated that cross-linking is the dominant mechanism in the energy range of 2.3–19.2 MeV. The cross-linking reported by FTIR spectroscopy destroyed the degree of ordering in the Makrofol samples, as revealed by the XRD technique. Also, this cross-linking led to an increase in the values of intrinsic viscosity from 0.41 to 0.68 at 28 °C, indicating an increase in the average molecular mass, associated with an increase in the refractive index. Additionally, the non-irradiated Makrofol samples showed significant color sensitivity toward neutron irradiation. The sensitivity toward neutron irradiation can be seen by the change in the blue color component of the non-irradiated Makrofol film to yellow after the samples are exposed to neutrons up to 19.2 MeV. This is accompanied by a net increase in the darkness of the samples.Keywords
This publication has 27 references indexed in Scilit:
- Thermal and optical properties of electron beam irradiated cellulose triacetateMaterials Chemistry and Physics, 2008
- Modification induced by alpha particle irradiationin Makrofol polycarbonateJournal of Applied Polymer Science, 2008
- Neutron-irradiation effects on track etching characteristics of polyester nuclear track detectorRadiation Effects and Defects in Solids, 2007
- Physical properties of electron beam irradiated poly(vinyl butyral) composites with carbamate, imidazole, and tetrazolium dyeJournal of Applied Polymer Science, 2006
- Characterization of the optical-functional properties of a waveguide written by an UV-laser into a planar polymer chipOptical Materials, 2005
- Irradiation performance of polytetrafluoroethylene (Teflon®) in a mixed fast neutron and gamma radiation fieldJournal of Nuclear Materials, 2002
- Electron induced modification in poly(ethylene terephthalate)Radiation Effects and Defects in Solids, 2001
- Gamma‐oxidation of linear low‐density polyethylene: The dose–rate effect of irradiation on chemical and physical modificationsJournal of Polymer Science Part A: Polymer Chemistry, 1995
- Carbonaceous clusters in irradiated polymers as revealed by UV-Vis spectrometryRadiation Effects and Defects in Solids, 1995
- Effects of neutron irradiation on polymer matrix composites at 5 K and at room temperatureJournal of Nuclear Materials, 1987