Torque vectoring system design for hybrid electric–all wheel drive vehicle
- 7 April 2020
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 234 (10-11) , 2680-2692
Abstract
A torque vectoring system is designed for the hybrid electric–all wheel drive vehicle where the front and rear wheels are powered by the combustion engine and electric motors, respectively. The vehicle provides enhanced handling performance by a twin motor drive unit that can distribute the driving and regenerative braking torques to the rear-left and rear-right wheels independently. Based on the driver’s intention, a sliding mode controller is designed to calculate the desired traction force and yaw moment for the vehicle. The force distribution between the front and rear axles is investigated considering the principle of the friction circle, and characteristics of the engine and drive motors. The vertical tire force is estimated using the random walk Kalman filter for the proportional distribution between the front and rear longitudinal forces. For the torque distribution between the rear-left and rear-right wheels, an optimization problem is formulated by considering the constraints of the friction circle and motor characteristics. The proposed algorithm is evaluated in a simulation environment first by reflecting the characteristics of the hybrid electric–all wheel drive modules. Then, the test vehicle is utilized to validate the handling performance experimentally and to compare with the uncontrolled cases.Keywords
This publication has 22 references indexed in Scilit:
- Electronic Stability Control Based on Motor Driving and Braking Torque Distribution for a Four In-Wheel Motor Drive Electric VehicleIEEE Transactions on Vehicular Technology, 2016
- Driving modes for designing the cornering response of fully electric vehicles with multiple motorsMechanical Systems and Signal Processing, 2015
- Rear wheel torque vectoring model predictive control with velocity regulation for electric vehiclesVehicle System Dynamics, 2015
- An optimal torque distribution control strategy for four-independent wheel drive electric vehiclesVehicle System Dynamics, 2015
- Fundamentals of Vehicle Dynamics2015
- Comparison of Feedback Control Techniques for Torque-Vectoring Control of Fully Electric VehiclesIEEE Transactions on Vehicular Technology, 2014
- Driving Control Algorithm for Maneuverability, Lateral Stability, and Rollover Prevention of 4WD Electric Vehicles With Independently Driven Front and Rear WheelsIEEE Transactions on Vehicular Technology, 2011
- Lateral load transfer and normal forces estimation for vehicle safety: experimental testVehicle System Dynamics, 2009
- Optimal brake torque distribution for a four-wheeldrive hybrid electric vehicle stability enhancementProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2007
- Introduction to Optimum Design with MATLAB2004