Adsorptive Removal of Cr(VI) from Aqueous Solution on Hydrous Cerium—Zirconium Oxide. Part I: Process Optimization by Response Surface Methodology
Open Access
- 1 March 2014
- journal article
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 32 (2-3) , 209-226
Abstract
Hydrous cerium–zirconium oxide (Ce0.25Zr0.75O2) was used for Cr(VI) removal by adsorption. The response surface methodology (RSM) was applied as a tool for the optimization of adsorption operational conditions (temperature, pH and adsorbent dose) with the combined effects of the key processing variables on the Cr removal efficiency (%RCr). The following conditions were found to be optimal: pH = 2, temperature = 28 °C, adsorbent dose = 4 g l−1. The %RCr obtained experimentally (92%) was in agreement with the value predicted by RSM (88%). The adsorption process followed the pseudo-second-order kinetic model and obeyed the Langmuir isotherm model. Thermodynamic parameters (ΔH°, ΔS° and ΔG°) indicated the exothermic and spontaneous nature of adsorption governed by physisorption interactions. Hydrous Ce0.25Zr0.75O2 showed high adsorption capacity (25 mg g−1), high desorption efficiency (80%), reached adsorption equilibrium quickly (30 minutes) and high chemical stability. The Cr(VI) adsorption on hydrous Ce0.25Zr0.75O2 was not completely reversible. The reduction of Cr(VI) to Cr(III) under acidic conditions was also responsible for Cr(VI) removal.Keywords
This publication has 28 references indexed in Scilit:
- Decolorization and mineralization of Diarylide Yellow 12 (PY12) by photo-Fenton process: the Response Surface Methodology as the optimization toolWater Science & Technology, 2012
- Heavy metal removal from water/wastewater by nanosized metal oxides: A reviewJournal of Hazardous Materials, 2012
- Chromium VI adsorption on cerium oxide nanoparticles and morphology changes during the processJournal of Hazardous Materials, 2010
- Improved performance of a cellulose-based anion exchanger with tertiary amine functionality for the adsorption of chromium(VI) from aqueous solutionsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2009
- Chromium(VI) removal from aqueous system using Helianthus annuus (sunflower) stem wasteJournal of Hazardous Materials, 2009
- Removal of phosphate by mesoporous ZrO2Journal of Hazardous Materials, 2008
- Kinetics, isotherm and thermodynamics for Cr(III) and Cr(VI) adsorption from aqueous solutions by crystalline hydrous titanium oxideThe Journal of Chemical Thermodynamics, 2008
- 3D Flowerlike Ceria Micro/Nanocomposite Structure and Its Application for Water Treatment and CO RemovalChemistry of Materials, 2007
- Removal of chromium from industrial waste by using eucalyptus barkBioresource Technology, 2006
- Oxygen Vacancies and Catalysis on Ceria SurfacesScience, 2005