Abstract
In the present work, a mediator-free biosensor for hydrogen peroxide (H2O2) based on a surface carboxyphenyl functionalised boron-doped diamond (BDD) electrode has been constructed via a simple electrochemical way in an aryl diazonium salt. The BDD surface was primarily interfacial, designed by grafting an aromatic ‘bridge’ of 4-carboxyphenyl (4-CP) groups by single-stepped electrochemical reduction of 4-CP diazonium cations. A locked-in carboxyl-terminated BDD interface was thus produced. Then the model biomolecule, cytochrome c (Cyt c) was attached to the interface through the ‘bridge’ by covalent combination between –NH2 terminal groups of Cyt c and –COOH groups of 4-CP, obtaining a Cyt c/4-CP/BDD biosensor. Well-defined peaks attributed to the FeIII/FeII couple of Cyt c were clearly observed on the biosensor which could not be obtained direct on BDD without carboxyphenyl functionalisation. The Cyt c/4-CP/BDD biosensor further exhibited remarkable biosensor features in the rapid and sensitive amperometric sensing of H2O2. The steady-state reduction current response to the addition of H2O2 could be achieved within 4 s. In the range from 4.0 × 10−6 to 3.6 × 10−5 M, the reduction current indicated good linear dependence with the concentration of H2O2. The detection limit was estimated to be as low as 6.1 × 10−7 M based on the signal to noise ratio of 3 and the apparent Michaelis constant was evaluated to be 1.02 ± 0.25 × 10−5 M according to the Lineweaver-Burke equation. All the results indicated that the covalent graft 4-carboxyphenyl group played an important role in BDD surface function to help the direct electron transfer of Cyt c with favourable biocompatibility and good bio-electrocatalytic affinity. A promising biosensor for hydrogen peroxide has thus been provided.

This publication has 48 references indexed in Scilit: