From polymer blends to in situ polymer/polymer composites: Morphology control and mechanical properties
Authors:
- 1 October 2002
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 42 (10) , 1990-2004
Abstract
In situ polymer/polymer short fiber composites were generated by a two‐step process. In the first step, a polyamide (PA) dispersed phase is blended with a polypropylene (PP) matrix in a twin‐screw extruder at a temperature at which both polymers are in molten state. The extrudate was then stretched at the die exit to generate long and thin fibers of PA in the PP matrix well oriented in the direction of flow. Adhesion between the phases was promoted by addition of PP grafted with maleic anhydride (PP‐g‐MA). During the second step, the chopped extrudates were molded by injection or compression molding at a temperature at which PA in the form of fibers is in the solid state and the PP matrix is molten. The control of the formation of such ultrafine fibers was obtained by quantitative analyses for the deformation of the minor PA‐phase during twin‐screw extrusion and stretching at the exit of the die that involve both shear and extensional flows. Morphology and mechanical properties of such polymer/polymer composites were compared to equivalent blends with dispersed spherical particles‐type morphology prepared in a batch mixer device.Keywords
This publication has 29 references indexed in Scilit:
- Transient elongational properties of an in situ generated polymer/polymer compositePolymer Engineering & Science, 2001
- Development of polymer blend morphology during compounding in a twin‐screw extruder. Part I: Droplet dispersion and coalescence—a reviewPolymer Engineering & Science, 1992
- Compatibilization of polymer blends by reactive processingPolymer Engineering & Science, 1991
- DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMSChemical Engineering Communications, 1982
- Studies on melt spinning. V. Elongational viscosity and spinnability of two‐phase systemsJournal of Applied Polymer Science, 1974
- Modes of dispersion of viscoelastic fluids in flowJournal of Colloid and Interface Science, 1972
- Drop Breakup in Simple Shear Fields of Viscoleastic FluidsIndustrial & Engineering Chemistry Fundamentals, 1972
- Particle motions in non-Newtonian mediaRheologica Acta, 1971
- The formation of emulsions in definable fields of flowProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1934
- The viscosity of a fluid containing small drops of another fluidProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1932