Nanoparticle effects on the morphology and mechanical properties of polypropylene spunbond webs
- 9 July 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 118 (6) , 3141-3155
Abstract
We report morphology and mechanical properties of natural nanoclay incorporated spunbond polypropylene composite webs. Nanocomposite spunbond webs were produced with up to 5 wt % natural nanoclay additives on Reicofil®‐2 spunbond line. Influence of nanoclay on the resin rheological properties, processibility, and mechanical properties of webs were studied. Wide angle X‐ray diffraction and transmission electron microscopy analysis were used to investigate the nanocomposite morphology. Intercalated and flocculated morphology was observed for all the concentrates and for all the spunbond fiber webs. The microstructure and polymer morphology in the presence of additives was characterized using a polarized optical microscope. At higher percentage, excess clay platelets were excluded out of the spherulite boundaries. About 20–30% increase in tear strength was observed for webs with up to 2 wt % nanoclay additives. Compared with the control polypropylene spunbond web, nanoclay reinforced samples showed better dimensional stability. Different failure mode was observed for spunbond webs with additives. Spunbond webs with even as low as 1 wt % clay retain their morphology and integrity in bond point after thermal bonding. Nanoclay incorporated spunbond webs showed significant improvements in the stiffness. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 23 references indexed in Scilit:
- Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An OverviewJournal of Composite Materials, 2006
- High‐performance filaments from compatibilized polypropylene/clay nanocompositesJournal of Applied Polymer Science, 2006
- Structural and mechanical properties of polymer nanocompositesMaterials Science and Engineering: R: Reports, 2006
- Clay exfoliation and organic modification on wear of nylon 6 nanocomposites processed by different routesComposites Science and Technology, 2005
- Contact angle measurement of select compatibilizers for polymer-silicate layer nanocompositesPolymer Testing, 2005
- Syndiotactic poly(propylene)/organoclay nanocomposite fibers: influence of the nano-filler and the compatibilizer on the fiber propertiesPolymers for Advanced Technologies, 2005
- PP/clay nanocomposites prepared by grafting-melt intercalationPolymer, 2001
- A hierarchical structure and properties of intercalated polypropylene/clay nanocompositesPolymer, 2001
- Polyolefin‐clay hybrids based on modified polyolefins and organophilic clayMacromolecular Materials and Engineering, 2000
- Thermal Shrinkage Of Oriented PolymersJournal of Macromolecular Science, Part C: Polymer Reviews, 1992