Microstructure Evolution of TB18 Alloy after Thermal Treatment and the Effect of Recrystallization Texture on Mechanical Properties
Open Access
Abstract
In industrial production, the deformation inhomogeneity after metal forging affects the mechanical properties of various parts of the forgings. The question of whether the organization and mechanical properties of β-titanium alloy can be improved by controlling the amount of forging deformation needs to be answered. Therefore, in this paper, a new sub-stable β-Ti alloy TB 18 (Ti-5.3Cr-4.9Mo4.9V-4.3Al-0.9Nb-0.3Fe) was subjected to three different levels of deformation, as well as solid solution-aging treatments, and the variation rules of microstructure and mechanical properties were investigated. During the solid solution process, the texture evolution pattern of the TB18 alloy at low deformation (20–40%) is mainly rotational cubic texture deviated into α-fiber texture; at high deformation (60%), the main components of the deformed texture are α-fiber texture with a specific orientation of (114). After subsequent static recrystallization, the α-fiber texture is deviated to an α*-fiber texture, while the specific orientation (114) can still be inherited as a major component of the recrystallized texture. The plasticity of the alloy in the normal direction (ND) after the solid solution is influenced by the existence of the //ND texture, and the plasticity of the alloy in the ND direction after aging is determined by a combination of the volume fraction of the //ND texture in the matrix phase and the volume fraction of [110]α//ND in the α phase. The results show that it is feasible to change the characteristics of the recrystallization texture of TB18 by controlling the deformation level of hot forging, thus realizing the modulation of the mechanical properties.
Keywords
Funding Information
- Science and Technology Department of Sichuan Province (2022YFG0102)
This publication has 38 references indexed in Scilit:
- High-purity titanium, zirconium, and hafnium in nuclear powerAtomic Energy, 2011
- Recrystallization kinetics and microstructure evolution during annealing of a cold-rolled Fe–Mn–C alloyActa Materialia, 2011
- Deformation theory and quantization2008
- Titanium2007
- An overview on the use of titanium in the aerospace industryMaterials Science and Engineering: A, 1996
- High angle boundaries and orientation distributions at large strainsScripta Metallurgica et Materialia, 1995
- Aerospace applications of beta titanium alloysJOM, 1994
- Development of texture and microstructure during cold-rolling and annealing of F.C.C. alloys: Example of an austenitic stainless steelActa Metallurgica, 1989
- Materials Science and Engineering1989
- Large strain behaviour of a superplastic copper alloy—II. Cavitation and fractureActa Metallurgica, 1984