Reduction of distortion by using the low transformation temperature effect for high alloy steels in electron beam welding
Authors:
Open Access
- 26 September 2020
- journal article
- research article
- Published by Springer Nature in Welding in the World
- Vol. 65 (1) , 23-34
Abstract
Residual stress and distortion of welded specimens are issues when it comes to geometrical requirements. The surrounding material prevents the dilatation associated with transformation in the area of heat input resulting in residual stress and distortion due to thermal contraction. In the past few years, low transformation temperature (LTT) material was successfully used as filler wire to reduce residual stress as well as distortion in the weld seam in arc welding processes. High alloy Fe-based filler materials with levels of chromium and nickel ensure a martensitic transformation at reduced temperatures in a low alloy base material. The LTT properties counteract the accumulation of stresses due to thermal contraction with compressive stresses that develop within the transformed region. This work used a high alloy base material in combination with a low alloy filler wire resulting in a microstructure that shows the same properties as LTT weld metals. This in situ alloying allows for an alloy composition tailored to the process. In order to provide a point of reference, comparable welds were made using conventional high alloy filler wire. As a result, the distortion and longitudinal residual stress was significantly reduced compared to welding with conventional filler wire.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft DFG
This publication has 21 references indexed in Scilit:
- Surface residual stresses in multipass welds produced using low transformation temperature filler alloysScience and Technology of Welding and Joining, 2014
- Residual stress engineering by low transformation temperature alloys—state of the art and recent developmentsWelding in the World, 2014
- Characterizing Phase Transformations and Their Effects on Ferritic Weld Residual Stresses with X-Rays and NeutronsMetallurgical and Materials Transactions A, 2008
- Henry Granjon Prize Competition 2007 Winner, Category B “Materials Behaviour and Weldability” Development of a Compressive Residual Stress Field Around a Weld Toe by Means of Phase TransformationsWelding in the World, 2008
- In Situ Monitoring of Weld Transformations to Control Weld Residual StressesMaterials Science Forum, 2008
- Developments in martensitic and bainitic steels: role of the shape deformationMaterials Science and Engineering: A, 2004
- Residual Stresses in Welded Joints – Sources and ConsequencesMaterials Science Forum, 2002
- Residual stress. Part 1 – Measurement techniquesMaterials Science and Technology, 2001
- A theoretical and numerical approach to the plastic behaviour of steels during phase transformations—I. Derivation of general relationsJournal of the Mechanics and Physics of Solids, 1986
- An examination of the validity of existing empirical formulae for the calculation of ms temperatureMetallurgical Transactions A, 1982