Hot-Air Contactless Single-Point Incremental Forming
Open Access
- 5 October 2023
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 7 (5) , 179
Abstract
Single-point incremental forming (SPIF) has emerged as a time-efficient approach that offers increased material formability compared to conventional sheet-metal forming techniques. However, the physical interaction between the forming tool and the sheet poses challenges, such as tool wear and formability limits. This study introduces a novel sheet-forming technique called contactless single-point incremental forming (CSPIF), which uses hot compressed air as a deformation tool, eliminating the requirement for physical interaction between the sheet and a rigid forming tool. In this study, a polycarbonate sheet was chosen as the case-study material and subjected to the developed CSPIF. The experiments were carried out at an air temperature of 160 °C, air pressure of 1 bar, a nozzle speed of 750 mm/min, and a step-down thickness of 0.75 mm. A Schlieren setup and a thermal camera were used to visualize the motion of the compressed hot air as it traveled from the nozzle to the sheet. The results showed that the CSPIF technique allowed for the precise shaping of the polycarbonate sheet with minimal springback. However, minor deviations from the designed profile were observed, primarily at the starting point of the nozzle, which can be attributed to the bending effects of the sample. In addition, the occurrence of sheet thinning and material buildup on the deformed workpiece was also observed. The average surface roughness (Ra) of the deformed workpiece was measured to be 0.2871 microns.Keywords
This publication has 40 references indexed in Scilit:
- Wear behavior of tribologically optimized tool surfaces for incremental forming processesTribology International, 2016
- Investigation of material deformation mechanism in double side incremental sheet formingInternational Journal of Machine Tools and Manufacture, 2015
- Manufacturing of Polymeric Biocompatible Cranial Geometry by Single Point Incremental FormingProcedia Engineering, 2015
- Plate forging of drawn cup with flange including thickening of cornersManufacturing Review, 2014
- An efficient method for thickness prediction in multi-pass incremental sheet formingThe International Journal of Advanced Manufacturing Technology, 2014
- Thermal and strain rate sensitive compressive behavior of polycarbonate polymer - experimental and constitutive analysisJournal of Polymer Research, 2014
- Large deflection of a non-linear, elastic, asymmetric Ludwick cantilever beam subjected to horizontal force, vertical force and bending torque at the free endMeccanica, 2014
- An assessment of various process strategies for improving precision in single point incremental formingInternational Journal of Material Forming, 2010
- A novel method to test the thinning limits of sheet metals in negative incremental formingInternational Journal of Machine Tools and Manufacture, 2007
- Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stressInternational Journal of Solids and Structures, 2006