Design Optimization of a New Hot Heat Sink with a Rectangular Fin Array for Thermoelectric Dehumidifiers
Authors:
- 1 July 2007
- journal article
- research article
- Published by Taylor & Francis in Heat Transfer Engineering
- Vol. 28 (7) , 645-655
Abstract
The objective of this research was aimed at conducting an experimental investigation to study the heat sink performance of a new rectangular fins array. Various operating conditions were considered, namely the distance between the fan and the fins, varied from 0 mm to 40 mm, heat supplied to the sink and the fan voltage. It was concluded that a fan installed at 30 mm height from the fins is recommended as the hot side temperature was the lowest. Next a pre-experimentation of small scale prototype of thermoelectric Dehumidifier (TED) was designed and constructed. It was composed of two thermoelectric (TE) cooling modules, MT2-1, 6-127, (two in serial) mounted between the rectangular fin heat exchangers with dimension 140 × 240 × 35 mm. The hot side was cooled by a ventilation fan whereas the air flow on the cold side was free convection. The effect of position of fan was investigation experimentally. Preliminary tests confirmed the good performance of the hot heat sink design for the intended thermoelectric application.Keywords
This publication has 15 references indexed in Scilit:
- Heat transfer and thermal performance analysis of a surface with hollow rectangular finsApplied Thermal Engineering, 2006
- Experimental study of heat transfer and fluid flow in longitudinal rectangular-fin array located in different orientations in fluid flowExperimental Thermal and Fluid Science, 2004
- Parametric study of natural convection heat transfer from horizontal rectangular fin arraysInternational Journal of Thermal Sciences, 2000
- Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packagingInternational Journal of Heat and Mass Transfer, 2000
- Optimum design of vertical rectangular fin arraysInternational Journal of Thermal Sciences, 1999
- Comparative analysis of jet impingement and microchannel cooling for high heat flux applicationsInternational Journal of Heat and Mass Transfer, 1999
- Experimental study of free convection and radiation in horizontal fin arraysInternational Journal of Heat and Mass Transfer, 1996
- Analysis of microchannels for integrated coolingInternational Journal of Heat and Mass Transfer, 1992
- Heat sink optimization with application to microchannelsIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1992
- Optimal Thermal Design of Forced Convection Heat Sinks-AnalyticalJournal of Electronic Packaging, 1991