Systematic Control of Anodic Aluminum Oxide Nanostructures for Enhancing the Superhydrophobicity of 5052 Aluminum Alloy
Open Access
Abstract
The recent increased interest in the various applications of superhydrophobic surfaces necessitates investigating ways of how this property can be enhanced further. Thus, this study investigated how superhydrophobic properties can be enhanced through the formation of anodic alumina nanostructures on 5052 aluminum alloy. A multistep anodizing process that alternates two different anodizing modes, mild anodization (MA) and hard anodization (HA), with an intermediate pore-widening (PW) process was employed. Multistep anodization was employed in two different ways: an MA → PW → HA process and an HA → PW → MA process. Both routes were conducted with PW durations of 40, 50, and 60 min. The well-defined nanostructures were coated with a self-assembled monolayer (SAM) of FDTS (1H, 1H, 2H, 2H-perfluorodecyltrichlorosilane). The contact angle values of water droplets were maximized in the pillar-like nanostructures, as they have a less solid fraction than porous nanostructures. With this, the study demonstrated the formation mechanism of both nanoscale pillar and nanoscale hierarchical structures, the wettability of the superhydrophobic surfaces, and the relationship between PW duration time with wettability and the solid fraction of the superhydrophobic surfaces.Keywords
Funding Information
- National Research Foundation of Korea (NRF) (NRF-2017R1C1B5075577)
This publication has 35 references indexed in Scilit:
- Air-Impregnated Nanoporous Anodic Aluminum Oxide Layers for Enhancing the Corrosion Resistance of AluminumLangmuir, 2015
- Transparent superhydrophobic/superhydrophilic TiO2-based coatings for self-cleaning and anti-foggingJournal of Materials Chemistry, 2012
- Corrosion resistance of composite coatings on low-carbon steel containing hydrophobic and superhydrophobic layers in combination with oxide sublayersCorrosion Science, 2012
- Low-cost and large-scale fabrication method for an environmentally-friendly superhydrophobic coating on magnesium alloyJournal of Materials Chemistry, 2012
- Single-Step Direct Fabrication of Pillar-on-Pore Hybrid Nanostructures in Anodizing Aluminum for Superior Superhydrophobic EfficiencyACS Applied Materials & Interfaces, 2011
- Anti-icing performance of superhydrophobic surfacesApplied Surface Science, 2011
- Are Superhydrophobic Surfaces Best for Icephobicity?Langmuir, 2011
- A general approach for superhydrophobic coating with strong adhesion strengthJournal of Materials Chemistry, 2010
- Facile Approach in Fabricating Superhydrophobic and Superoleophilic Surface for Water and Oil Mixture SeparationACS Applied Materials & Interfaces, 2009
- Self-cleaning surfaces — virtual realitiesNature Materials, 2003