Thermocycling — the effects upon the compressive strength and abrasion resistance of three composite resins
Author:
- 1 September 1994
- journal article
- research article
- Published by Wiley in Journal of Oral Rehabilitation
- Vol. 21 (5) , 533-543
Abstract
Summary: The purpose of this investigation was to examine the effects of thermocycling upon the compressive strength and abrasive wear resistance of three commercial composites Fulfil®, P‐50® and Herculite‐XR®. Specimens of each material were divided into five treatment groups comprising a control, and four different cycling and storage regimes. Tests for compressive strength and wear resistance were carried out. Prior to testing all specimens were stored in distilled water for 1 week. Three groups were stored at a temperature of 37°C and the remaining two at 60°C. Thereafter all groups that were thermocycled were subjected to 750 cycles of a thermocycling regime consisting of the cycle ACAB where A and B represent the fixed temperatures of 37°C and 5°C, and C, depending upon the treatment group, either 50°C or 60°C.One‐way analyses of variance upon the compressive strength and wear factor data following the treatments highlighted significant differences in the mean compressive strength for all materials (Fulfil (P < 0.05), P‐50 and Herculite‐XR (P < 0.01)) and in the wear factor values for only Fulfil and P‐50 (P < 0.001). Surprisingly, thermocycling P‐50 with an upper temperature limit of 50°C had catastrophic consequences upon the measured properties.It is concluded that some of the observed behaviour may have potentially detrimental consequences upon the long‐term clinical durability of the materials tested.Keywords
This publication has 16 references indexed in Scilit:
- Effect of surface conditioning on the abrasion rate of dental compositesJournal of Dentistry, 1991
- The effect of thermal cycling on the fracture toughness of seven composite restorative materialsDental Materials, 1989
- Variables Affecting the Fracture Toughness of Dental CompositesJournal of Dental Research, 1987
- Fracture Toughness of Dental Composites Determined Using the Short-rod Fracture Toughness TestJournal of Dental Research, 1986
- In vitro surface degradation of composites by water and thermal cyclingDental Materials, 1986
- A method for measuring the wear of restorative materials in vitroBritish Dental Journal, 1981
- Physical and Chemical Properties and WearJournal of Dental Research, 1979
- High-Voltage Electron Microscopic Study of Dislocations in HydroxyapatiteJournal of Dental Research, 1978
- Revised American Dental Association Specification No. 1 for Alloy for Dental AmalgamThe Journal of the American Dental Association, 1977
- Pattern of Wear in Posterior Composite RestorationsJournal of Dental Research, 1977