Copper Nitride Nanowires Printed Li with Stable Cycling for Li Metal Batteries in Carbonate Electrolytes
Authors:
- 12 January 2020
- journal article
- research article
- Published by Wiley in Advanced Materials
- Vol. 32 (7) , e1905573
Abstract
The practical implementation of the lithium metal anode is hindered by obstacles such as Li dendrite growth, large volume changes, and poor lifespan. Here, copper nitride nanowires (Cu3N NWs) printed Li by a facile and low‐cost roll‐press method is reported, to operate in carbonate electrolytes for high‐voltage cathode materials. Through one‐step roll pressing, Cu3N NWs can be conformally printed onto the Li metal surface, and form a Li3N@Cu NWs layer on the Li metal. The Li3N@Cu NWs layer can assist homogeneous Li‐ion flux with the 3D channel structure, as well as the high Li‐ion conductivity of the Li3N. With those beneficial effects, the Li3N@Cu NWs layer can guide Li to deposit into a dense and planar structure without Li‐dendrite growth. Li metal with Li3N@Cu NWs protection layer exhibits outstanding cycling performances even at a high current density of 5.0 mA cm−2 with low overpotentials in Li symmetric cells. Furthermore, the stable cyclability and improved rate capability can be realized in a full cell using LiCoO2 over 300 cycles. When decoupling the irreversible reactions of the cathode using Li4Ti5O12, stable cycling performance over 1000 cycles can be achieved at a practical current density of ≈2 mA cm−2.Keywords
Funding Information
- Korea Institute of Energy Technology Evaluation and Planning
- Ministry of Trade, Industry and Energy (20194010201890, 20194030202450)
This publication has 43 references indexed in Scilit:
- Properties of surface film on lithium anode with LiNO3 as lithium salt in electrolyte solution for lithium–sulfur batteriesElectrochimica Acta, 2012
- Electrochemical behaviors of a Li3N modified Li metal electrode in secondary lithium batteriesJournal of Power Sources, 2011
- Intrinsic surface band bending inultrathin filmsPhysical Review B, 2007
- Lithium metal stripping/plating mechanisms studies: A metallurgical approachElectrochemistry Communications, 2006
- Electrochemistry of Cu[sub 3]N with LithiumJournal of the Electrochemical Society, 2003
- A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutionsSolid State Ionics, 2002
- Dendritic growth mechanisms in lithium/polymer cellsJournal of Power Sources, 1999
- Lithium nitride and related materials case study of the use of modern solid state research techniques☆Solid State Ionics, 1982
- The Electrochemical Behavior of Alkali and Alkaline Earth Metals in Nonaqueous Battery Systems—The Solid Electrolyte Interphase ModelJournal of the Electrochemical Society, 1979
- Re-evaluation of the lithium nitride structureJournal of the Less Common Metals, 1976