Complex Modulus and Fatigue Resistance of Different Bituminous Binders and Corresponding Mixtures Containing Reclaimed Asphalt Pavement
- 19 October 2015
- conference paper
- Published by American Society of Civil Engineers (ASCE)
- p. 74-85
Abstract
The objective of the paper is to investigate the influence of bitumen nature on complex modulus and fatigue resistance of bituminous mixtures produced with reclaimed asphalt pavement (RAP). Eight distinct mixtures were produced with eight different modified and unmodified base binders. RAP content was fixed equal to 20% for all mixtures. For each mixture, the corresponding binder blend was produced by mixing the base binder with RAP-extracted binder, in the same proportions. A total of 16 binders (eight base binders and eight binder blends) were therefore used in the study. Both advanced and classical tests commonly used by road paving industry in Europe were performed. Complex modulus (at 15°C and 10 Hz) and fatigue (at 10°C and 25 Hz) DSR tests were carried out on all binders. Two-point bending complex modulus (at 15°C and 10 Hz) and fatigue (at 10°C and 25 Hz) tests were carried out on trapezoidal samples of mixtures. Complex modulus and fatigue resistance of mixtures appeared to vary significantly depending on the nature of the base binder. However, clear correspondences between values obtained for mixtures and corresponding binders could not be found.Keywords
This publication has 13 references indexed in Scilit:
- Calculation of particle heating times of reclaimed asphalt pavement materialRoad Materials and Pavement Design, 2014
- Statistical Analysis of Influence of Mix Design Parameters on Mechanical Properties of Mixes with Reclaimed Asphalt PavementTransportation Research Record: Journal of the Transportation Research Board, 2014
- Statistical analysis of the influence of RAP and mix composition on viscoelastic and fatigue properties of asphalt mixesMaterials and Structures, 2013
- Laboratory Evaluation of Asphalt Binders and Mixtures Containing Polyphosphoric AcidTransportation Research Record: Journal of the Transportation Research Board, 2011
- The effect of polymer modification on hot mix asphalt fracture at tensile loading conditionsInternational Journal of Pavement Engineering, 2010
- Laboratory Evaluation of Mixes Containing Recycled Asphalt Pavement (RAP)Road Materials and Pavement Design, 2009
- Effect of Reclaimed Asphalt Pavement (Proportion and Type) and Binder Grade on Asphalt MixturesTransportation Research Record: Journal of the Transportation Research Board, 2008
- Effect of Binder Characteristics on Fatigue of Asphalt Pavement Using an Intrinsic Damage ApproachRoad Materials and Pavement Design, 2005
- Evaluation of fatigue properties of bituminous bindersMaterials and Structures, 2004
- Fatigue and Permanent Deformation Models for Polymer-Modified Asphalt MixturesTransportation Research Record: Journal of the Transportation Research Board, 2001