Compared Thermal Modeling of Anode- and Electrolyte-Supported SOFC-Gas Turbine Hybrid Systems
- 1 April 2020
- journal article
- research article
- Published by ASME International in Journal of Electrochemical Energy Conversion and Storage
- Vol. 18 (1)
Abstract
In this study, two solid oxide fuel cell (SOFC) hybrid systems (anode-supported model (ASM) and electrolyte-supported model (ESM)) is developed in matlab® and compared. The hybrid system model is considered to investigate the impacts of various operating parameters such as SOFC operating temperature and steam/carbon ratio on power production and performance of the hybrid system where it is projected that results can be utilized as guidelines for optimal hybrid system operation. According to the findings, a maximum 695 kW power is produced at 750 °C operating temperature for the anode-supported model, whereas 627 kW power is produced at 1000 °C for the electrolyte-supported model. The highest electrical efficiencies for the anode-supported model and the electrolyte-supported model are 64.6% and 58.3%, respectively. Besides, the lower value of the steam to carbon ratio is favorable for increased power output from the fuel cell and consequently a high SOFC efficiency.Keywords
This publication has 29 references indexed in Scilit:
- High-efficiency power production from natural gas with carbon captureJournal of Power Sources, 2010
- Thermodynamic modeling of a gas turbine cycle combined with a solid oxide fuel cellInternational Journal of Hydrogen Energy, 2008
- Performance of combined internally reformed intermediate/high temperature SOFC cycle compared to internally reformed two-staged intermediate temperature SOFC cycleInternational Journal of Hydrogen Energy, 2008
- Electrochemical study of a planar solid oxide fuel cell: Role of support structuresJournal of Power Sources, 2008
- Thermodynamic modeling of direct internal reforming solid oxide fuel cells operating with syngasInternational Journal of Hydrogen Energy, 2007
- Performance comparison of two combined SOFC–gas turbine systemsJournal of Power Sources, 2007
- Simulation and exergy analysis of a hybrid Solid Oxide Fuel Cell (SOFC)–Gas Turbine SystemEnergy, 2006
- Performance characteristics of a MW-class SOFC/GT hybrid system based on a commercially available gas turbineJournal of Power Sources, 2006
- Analysis and optimization of a solid oxide fuel cell and intercooled gas turbine (SOFC–ICGT) hybrid cycleJournal of Power Sources, 2004
- Combined solid oxide fuel cell and gas turbine systems for efficient power and heat generationJournal of Power Sources, 2000