Etching characteristics of LiNbO3 crystal by fluorine gas plasma reactive ion etching
Open Access
- 1 January 2001
- journal article
- research article
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 2 (3-4) , 563-569
Abstract
The etching characteristics of a LiNbO3 single crystal have been investigated using plasma reactive ion etching (RIE) with a mixture of CF4/Ar/H2. The etching rate of LiNbO3 with the mixture of CF4/Ar/H2 gases was evaluated. The etching surface was evaluated by atomic force microscopy, X-ray diffraction and X-ray photoelectron spectroscopy methods. The rate-determining process of RIE is the supply of F radicals in RIE. The surface morphology of the etched LiNbO3 changed with the increase in the H2 gas flow ratio. The surface profile became flat, on optimizing the etching conditions, similar to the surface of non-etched LiNbO3. The X-ray diffraction peakfor etched LiNbO3 using the mixture of CF4 and Ar gases did not appear, because a non-crystalline layer was formed. It was found that the crystallinity of the surface is dependent on both, the flow rate of H2 gas and the etching time. F atoms exist in the contamination layer of the sample etched, using the mixture of CF4, Ar and H2 gases. Optimum et...Keywords
This publication has 4 references indexed in Scilit:
- Etching Charactristic of LiNbO3 Crystal in Fluorine System Gas Plasma RIEIEEJ Transactions on Fundamentals and Materials, 2000
- Dry etching charactristic of LiNbO3 in plasmaIEEJ Transactions on Sensors and Micromachines, 1998
- Design of ultra-broad-band LiNbO/sub 3/ optical modulators with ridge structureIEEE Transactions on Microwave Theory and Techniques, 1995
- Microfabrication of LiNbO3 by Reactive Ion-Beam EtchingJapanese Journal of Applied Physics, 1980