Tribological Behaviors of Ni-P Coatings on PEO-Treated AA1050 Alloy
Open Access
Abstract
Tribological behaviors of the plasma electrolytic oxidation (PEO)-treated Al1050 alloy surface without and with Ni-P deposits was examined by analyzing of the width of abrasion groove, weight loss, friction coefficient and composition at the wear track after a 100 m ball-on-disc test. The surface color, surface and cross-sectional morphologies and surface roughness (Ra) were also investigated to explain different wear behaviors of PEO films without and with Ni-P deposit. After the 100 m ball-on-disc test, a circular abrasion groove with relatively large width and shallow depth was formed when Ni-P particles cover the top surface of PEO films, but a relatively narrow and deep circular abrasion groove was formed on the Ni-P layer-covered PEO film surface. Iron was only detected at the wear track of 5 and 10 μm PEO films without Ni-P deposit, suggesting that the steel ball is worn out by the PEO films but not by the Ni-P deposit. An extremely large amount of weight loss was obtained from the Ni-P layer-covered PEO film surface, which could be related to the high density and low hardness of the Ni-P layer.Keywords
Funding Information
- Ministry of SMEs and Startups (S2838879)
This publication has 24 references indexed in Scilit:
- Effects of NaOH Concentration on the Structure of PEO Films Formed on AZ31 Mg Alloy in PO43-and SiO32-Containing Aqueous SolutionJournal of the Korean institute of surface engineering, 2016
- High growth rate, wear resistant coatings on an Al–Cu–Li alloy by plasma electrolytic oxidation in concentrated aluminate electrolytesSurface and Coatings Technology, 2015
- Effects of cathodic voltages on structure and wear resistance of plasma electrolytic oxidation coatings formed on aluminium alloyApplied Surface Science, 2014
- Formation and characterization of wear-resistant PEO coatings formed on β-titanium alloy at different electrolyte temperaturesApplied Surface Science, 2012
- Wear of an aluminium alloy coated by plasma electrolytic oxidationSurface and Coatings Technology, 2012
- Generation mechanism of microdischarges during plasma electrolytic oxidation of Al in aqueous solutionsCorrosion Science, 2009
- Plasma electrolytic oxidation (PEO) for production of anodised coatings on lightweight metal (Al, Mg, Ti) alloysTransactions of the IMF, 2009
- Wear resistant alumina coatings produced by a sol–gel processSurface and Coatings Technology, 2006
- Tribological Behavior of Microarc Oxidation Coatings on Aluminum AlloyISIJ International, 2006
- Plasma electrolysis for surface engineeringSurface and Coatings Technology, 1999