Toward Architected Microstructures Using Advanced Laser Beam Shaping in Laser Powder Bed Fusion of Ti‐6Al‐4V
Open Access
- 24 April 2025
- journal article
- Published by Wiley in Advanced Functional Materials
Abstract
Laser Powder Bed Fusion (LPBF) stations mostly use lasers with a Gaussian beam intensity distribution, as it has advantages like small divergence and high ability to be focused. This distribution creates significant thermal gradients leading to high cooling rates, which promote the formation of an α’‐martensitic structure in Ti‐6Al‐4V. While this microstructure offers high strength, it sacrifices ductility, necessitating post‐processing heat treatments to decompose the α’‐martensite into an α+β lamellar structure. However, these post‐treatments are time‐consuming, and notably transform the part microstructure in a uniform way. In this study, an advanced laser beam shaping module, based on a liquid crystals on silicon‐spatial light modulator (LCoS‐SLM) is employed, to customize the intensity distribution and reduce the cooling rate with appropriate processing parameters. Thermal camera monitoring, along with finite element modeling (FEM), confirmed a significant reduction in the cooling rate for the tailored beam, compared to the Gaussian profile. This technique is implemented in the LPBF process, resulting in specimens with a mixture of lamellar α+β and α’‐martensitic structures site specifically. Beam shaping is thereby shown to provide new degrees of freedom for fine‐tuning of microstructures at the melt pool scale, and for LPBF building of 3D architected microstructures.Keywords
Funding Information
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
This publication has 73 references indexed in Scilit:
- Microstructure-Based Modeling of Laser Beam Shaping During Additive ManufacturingJOM, 2024
- Controlling the Glassy State toward Structural and Mechanical Enhancement: Additive Manufacturing of Bulk Metallic Glass Using Advanced Laser Beam Shaping TechnologyAdvanced Functional Materials, 2023
- Laser‐Induced Keyhole Defect Dynamics during Metal Additive ManufacturingAdvanced Engineering Materials, 2019
- Additive manufacturing technology: the status, applications, and prospectsThe International Journal of Advanced Manufacturing Technology, 2018
- Estimation of Effective Thermal Conductivity of Ti-6Al-4V Powders for a Powder Bed Fusion Process Using Finite Element AnalysisInternational Journal of Precision Engineering and Manufacturing, 2018
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zonesActa Materialia, 2016
- Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decompositionActa Materialia, 2015
- On the Texture Formation of Selective Laser Melted Ti-6Al-4VMetallurgical and Materials Transactions A, 2014
- Thermophysical Properties of Solid and Liquid Ti-6Al-4V (TA6V) AlloyInternational Journal of Thermophysics, 2006
- Influence of tempering temperature and time on the α′-Ti-6Al-4V martensiteJournal of Alloys and Compounds, 1996