Printed and Electrochemically Gated, High‐Mobility, Inorganic Oxide Nanoparticle FETs and Their Suitability for High‐Frequency Applications
- 20 July 2012
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 22 (23) , 4909-4919
Abstract
Solution‐processed or printed n‐channel field‐effect transistors (FETs) with high performance are not reported very often in the literature due to the scarcity of high‐mobility n‐type organic semiconductors. On the other hand, low‐temperature processed n‐channel metal oxide semiconductor (NMOS) transistors from electron conducting inorganic‐oxide nanoparticles show reduced‐performance and low mobility because of large channel roughness at the channel‐dielectric interface. Here, a method to produce ink‐jet printed high performance NMOS transistor devices using inorganic‐oxide nanoparticles as the transistor channel in combination with a 3D electrochemical gating (EG) via printed composite solid polymer electrolytes is presented. The printed FETs produced show a device mobility value in excess of 5 cm2 V−1 s−1, even though the root mean square (RMS) roughness of the nanoparticulate channel exceeds 15 nm. Extensive studies on the frequency dependent polarizability of composite polymer electrolyte capacitors show that the maximum attainable speed in such printed, long channel transistors is not limited by the ionic conductivity of the electrolytes. Therefore, the approach of combining printable, high‐quality oxide nanoparticles and the composite solid polymer electrolytes, offers the possibility to fully utilize the large mobility of oxide semiconductors to build all‐printed and high‐speed devices. The high polarizability of printable polymer electrolytes brings down the drive voltages to ≤1 V, making such FETs well‐suited for low‐power, battery compatible circuitry.Keywords
This publication has 40 references indexed in Scilit:
- Bithiophene-Imide-Based Polymeric Semiconductors for Field-Effect Transistors: Synthesis, Structure−Property Correlations, Charge Carrier Polarity, and Device StabilityJournal of the American Chemical Society, 2011
- n‐Type Organic Semiconductors in Organic ElectronicsAdvanced Materials, 2010
- All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic FoilsIEEE Transactions on Electron Devices, 2010
- Low‐Voltage Ring Oscillators Based on Polyelectrolyte‐Gated Polymer Thin‐Film TransistorsAdvanced Materials, 2009
- Fiber‐Embedded Electrolyte‐Gated Field‐Effect Transistors for e‐TextilesAdvanced Materials, 2009
- Downscaling of Organic Field‐Effect Transistors with a Polyelectrolyte Gate InsulatorAdvanced Materials, 2008
- Ultralow-power organic complementary circuitsNature, 2007
- Jet printing flexible displaysMaterials Today, 2006
- A large-area, flexible pressure sensor matrix with organic field-effect transistors for artificial skin applicationsProceedings of the National Academy of Sciences, 2004
- Organic Thin Film Transistors for Large Area ElectronicsAdvanced Materials, 2002