Microscopic Estimation of Arterial Vehicle Positions in a Low-Penetration-Rate Connected Vehicle Environment
- 1 October 2014
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering
- Vol. 140 (10)
Abstract
Wireless communication among vehicles and roadside infrastructure, known as connected vehicles, is expected to provide higher-resolution real-time vehicle data, which will allow more effective traffic monitoring and control. Availability of connected vehicle technology among the vehicle fleet will likely grow gradually, but it will possibly remain limited, with many drivers potentially being unwilling to transmit their locations. This is problematic given that research has indicated that the effectiveness of many connected vehicle mobility applications will depend on the availability of location data from a minimum of 20–30% of roadway vehicles. In an effort to improve the performance of connected vehicle applications at low connected vehicle technology penetration rates, the authors propose a novel technique to estimate the positions of noncommunicating (unequipped) vehicles based on the behaviors of communicating (equipped) vehicles along a signalized arterial. Unequipped vehicle positions are estimated based on observed gaps in a stopped queue, and the forward movements of these estimated vehicles are simulated microscopically using a commercial traffic simulation software package. In simulations, the algorithm made more correct than incorrect estimates of unequipped vehicle positions in the same lane and within 7 m longitudinally. When applied to a previously developed connected vehicle traffic signal control strategy in simulation, the location estimation algorithm produced small improvements in delays, speeds, and stopped delay when compared to an equipped-vehicle-only scenario at penetration rates of 25% or less. The location estimation algorithm is generic, and it could be applied to other connected vehicle applications to improve performance at low penetration rates.Keywords
All Related Versions
This publication has 13 references indexed in Scilit:
- Vehicle trajectory reconstruction for signalized intersections using mobile traffic sensorsTransportation Research Part C: Emerging Technologies, 2013
- Traffic Signal Control with Connected VehiclesTransportation Research Record: Journal of the Transportation Research Board, 2013
- PAMSCOD: Platoon-based arterial multi-modal signal control with online dataTransportation Research Part C: Emerging Technologies, 2012
- Implementing kinematic wave theory to reconstruct vehicle trajectories from fixed and probe sensor dataTransportation Research Part C: Emerging Technologies, 2012
- Real time queue length estimation for signalized intersections using travel times from mobile sensorsTransportation Research Part C: Emerging Technologies, 2011
- Estimation of Lane-Level Travel Times in Vehicle-to-Vehicle and Vehicle-to-Infrastructure–Based Traffic Information SystemTransportation Research Record: Journal of the Transportation Research Board, 2011
- Incorporation of Lagrangian measurements in freeway traffic state estimationTransportation Research Part B: Methodological, 2010
- Evaluation of a cellular phone-based system for measurements of traffic speeds and travel times: A case study from IsraelTransportation Research Part C: Emerging Technologies, 2007
- Microscopic Simulation Model Calibration and Validation: Case Study of VISSIM Simulation Model for a Coordinated Actuated Signal SystemTransportation Research Record: Journal of the Transportation Research Board, 2003
- Application of Probe-Vehicle Data for Real-Time Traffic-State Estimation and Short-Term Travel-Time Prediction on a FreewayTransportation Research Record: Journal of the Transportation Research Board, 2003