Computational Methods for Modelling and Optimization of Flow Control Devices
Open Access
Abstract
Over the last few years, the advances in size and weight for wind turbines have led to the development of flow control devices. The current work presents an innovative method to model flow control devices based on a cell-set model, such as Gurney flaps (GFs). This model reuses the cells which are around the required geometry and a wall boundary condition is assigned to the generated region. Numerical simulations based on RANS equations and with have been performed. Firstly, a performance study of the cell-set model on GFs was carried out by comparing it with a fully mesh model of a DU91W250 airfoil. A global relative error of 1.13% was calculated. Secondly, optimum GF lengths were determined (from 0% to 2% of c) for a DU97W300 airfoil and an application of them. The results showed that for lower angles of attack (AoAs) larger GFs were needed, and as the AoA increased, the optimum GF length value decreased. For the purpose of studying the effects generated by two flow control devices (vortex generators (VGs) and optimum GF) working together, a triangular VG based on the jBAY model was implemented. Resulting data indicated, as expected, that when both flow control devices were implemented, higher CL and lower CD values appeared.
Keywords
Funding Information
- Euskal Herriko Unibertsitatea (EHU12/26)
- Ekonomiaren Garapen eta Lehiakortasun Saila, Eusko Jaurlaritza (S-PE11UN112)
This publication has 24 references indexed in Scilit:
- CFD code comparison for 2D airfoil flowsJournal of Physics: Conference Series, 2016
- Numerical investigation on wind turbine vortex generators employing transition modelsJournal of Renewable and Sustainable Energy, 2015
- Testing of self‐similarity and helical symmetry in vortex generator flow simulationsWind Energy, 2015
- Effects of vortex generators on a blunt trailing-edge airfoil for wind turbinesRenewable Energy, 2015
- Investigation of flow behind vortex generators by stereo particle image velocimetry on a thick airfoil near stallWind Energy, 2012
- Review Paper on Wind Turbine AerodynamicsJournal of Fluids Engineering, 2011
- Control of a decelerating boundary layer. Part 1: Optimization of passive vortex generatorsAerospace Science and Technology, 2006
- Vortex-Generator Model and Its Application to Flow ControlJournal of Aircraft, 2005
- Summary of the Delft University Wind Turbine Dedicated AirfoilsJournal of Solar Energy Engineering, 2003
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994