Improvement of frequency responses of an in-plane electro-thermal cantilever sensor for real-time measurement
- 5 November 2019
- journal article
- research article
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 29 (12) , 124006
Abstract
Resonance-based sensors ordinarily show a symmetrical amplitude shape, which is accompanied by a monotonic transition as its phase response. At its resonance state, there is a 90° phase difference between the excitation force and the system response. Nevertheless, due to some parasitic factors, resonance-based sensors might show non-ideal frequency response as seen in in-plane electro-thermal piezoresistive cantilever sensors (EtPCSs). Because of a direct thermal parasitic coupling from the excitation part to the sensing part, the sensor output shows an asymmetric amplitude shape and a reversing phase response. In some EtPCS that have relatively lower thermal exposure on their sensing part, a symmetrical amplitude shape could be demonstrated but was still accompanied with a low magnitude of monotonical phase response. In this work, a method of reference subtraction was introduced to enhance the frequency response of the EtPCS at changing ambient conditions (e.g. humidity, temperature, smoke exposure). As a result, we obtained optimized frequency responses suitable for a phase-locked loop-based system to carry out resonant-frequency tracking in real-time.Keywords
Funding Information
- European Union’s Horizon 2020 Research and Innovation Programme (17IND05 MicroProbes)
This publication has 38 references indexed in Scilit:
- Silicon resonant nanopillar sensors for airborne titanium dioxide engineered nanoparticle mass detectionSensors and Actuators B: Chemical, 2013
- Airborne engineered nanoparticle mass sensor based on a silicon resonant cantileverSensors and Actuators B: Chemical, 2013
- Lorentz force actuation of a heated atomic force microscope cantileverNanotechnology, 2012
- Integrated microcantilevers for high-resolution sensing and probingMeasurement Science and Technology, 2011
- Resonant cantilever sensors operated in a high-Q in-plane mode for real-time bio/chemical detection in liquidsSensors and Actuators B: Chemical, 2011
- Self-heating in piezoresistive cantileversApplied Physics Letters, 2011
- New insights into the formation of volatile compounds in mainstream cigarette smokeAnalytical and Bioanalytical Chemistry, 2010
- Resonant-cantilever bio/chemical sensors with an integrated heater for both resonance exciting optimization and sensing repeatability enhancementJournal of Micromechanics and Microengineering, 2009
- Actuation displacement performance change of pre-stressed piezoelectric actuators attached to a flat surfaceSmart Materials and Structures, 2009
- Volatile Components of Cigarette Smoke: Effect of Acrolein and Acetaldehyde on Human Gingival Fibroblasts In VitroJournal of Periodontology, 2000