Thermocapillary actuation by optimized resistor pattern: bubbles and droplets displacing, switching and trapping
- 5 May 2010
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 10 (14) , 1835-1840
Abstract
We report a novel method for bubble or droplet displacement, capture and switching within a bifurcation channel for applications in digital microfluidics based on the Marangoni effect, i.e. the appearance of thermocapillary tangential interface stresses stemming from local surface tension variations. The specificity of the reported actuation is that heating is provided by an optimized resistor pattern (B. Selva, J. Marchalot and M.-C. Jullien, An optimized resistor pattern for temperature gradient control in microfluidics, J. Micromech. Microeng., 2009, 19, 065002) leading to a constant temperature gradient along a microfluidic cavity. In this context, bubbles or droplets to be actuated entail a surface force originating from the thermal Marangoni effect. This actuator has been characterized (B. Selva, I. Cantat, and M.-C. Jullien, Migration of a bubble towards a higher surface tension under the effect of thermocapillary stress, preprint, 2009) and it was found that the bubble/droplet (called further element) is driven toward a high surface tension region, i.e. toward cold region, and the element velocity increases while decreasing the cavity thickness. Taking advantage of these properties three applications are presented: (1) element displacement, (2) element switching, detailed in a given range of working, in which elements are redirected towards a specific evacuation, (3) a system able to trap, and consequently stop on demand, the elements on an alveolus structure while the continuous phase is still flowing. The strength of this method lies in its simplicity: single layer system, in situ heating leading to a high level of integration, low power consumption (P < 0.4 W), low applied voltage (about 10 V), and finally this system is able to manipulate elements within a flow velocity up to 1 cm s−1.Keywords
This publication has 30 references indexed in Scilit:
- Integration of a uniform and rapid heating source into microfluidic systemsMicrofluidics and Nanofluidics, 2009
- An optimized resistor pattern for temperature gradient control in microfluidicsJournal of Micromechanics and Microengineering, 2009
- Laser microfluidics: fluid actuation by lightJournal of Optics A: Pure and Applied Optics, 2009
- Monodisperse droplet generation and rapid trapping for single molecule detection and reaction kinetics measurementLab on a Chip, 2008
- Thermocapillary actuation of droplet in a planar microchannelMicrofluidics and Nanofluidics, 2007
- Structure of Liquid Films of an Ordered Foam Confined in a Narrow ChannelLangmuir, 2007
- Optically actuated thermocapillary movement of gas bubbles on an absorbing substrateApplied Physics Letters, 2007
- Thermocapillary valve for droplet production and sortingPhysical Review E, 2007
- Reactions in Droplets in Microfluidic ChannelsAngewandte Chemie International Edition, 2006
- Reciprocating thermocapillary plug motion in an externally heated capillaryMicrofluidics and Nanofluidics, 2006