Influence of Complex Service Factors on Ravelling Resistance Performance for Porous Asphalt Pavements
Open Access
Abstract
The study aims to analyze the influence of complex service factors on ravelling resistance performance for large-void asphalt pavements by carrying out tests on environmental and vehicle factors, conducting ultraviolet aging, freeze–thaw cycles, as well as vehicle speed simulated tests with the Rotating Surface Abrasion Test, vehicle tests, and traffic volume tests, and by making a correlation analysis between the Cantabro Abrasion test and Rotating Surface Abrasion Test. The result shows that environmental factors significantly affect the ravelling resistance performance of drainage asphalt pavements. With the increase in the times of UV aging and freeze–thaw cycles, the ravelling loss rate of asphalt specimens shows a tendency to increase, and the combined test of UV aging and freeze–thaw cycles aggravated the ravelling damage of asphalt specimens. Meanwhile, vehicle factors have a significant attenuation effect on the ravelling resistance performance of drainage asphalt pavements. With the increase in the speed, pressure, and times of the Rotating Surface Abrasion, the ravelling loss rate of asphalt specimens shows a steady tendency to increase. Furthermore, there exists a good correlation between the Rotating Surface Abrasion speed, pressure, times, and the ravelling loss rate. Finally, the two test results of the Cantabro Abrasion test and Rotating Surface Abrasion test are consistent in their changes during single/composite factor analysis, confirming the feasibility of using the Rotating Surface Abrasion test index to characterize the change in the ravelling resistance performance of drainage asphalt pavements.Keywords
Funding Information
- Science and Technology Innovation Project of Yunnan Communications Investment and Construction Group Co., Ltd. (YCIC-YF-2021-09, 202205AG070008, [2020]No.15-(1), ZL-2021-02)
- Yunnan Key Laboratory of Digital Communications (YCIC-YF-2021-09, 202205AG070008, [2020]No.15-(1), ZL-2021-02)
- Science and Technology Innovation and Demonstration Project of Yunnan Provincial Department of Transportation (YCIC-YF-2021-09, 202205AG070008, [2020]No.15-(1), ZL-2021-02)
- Independent Science and Technology Project of Yunnan Traffic Planning Design Research Institute Co., Ltd (YCIC-YF-2021-09, 202205AG070008, [2020]No.15-(1), ZL-2021-02)
This publication has 25 references indexed in Scilit:
- Performance enhancement of porous asphalt pavement using red mud as alternative fillerConstruction and Building Materials, 2018
- Performance of porous asphalt mixture with various additivesInternational Journal of Pavement Engineering, 2016
- Performance evaluation of rubberized and SBS modified porous asphalt mixturesConstruction and Building Materials, 2016
- Study of the Raveling Resistance of Porous Asphalt Pavements Used in Sustainable Drainage Systems Affected by Hydrocarbon SpillsSustainability, 2015
- Performance evaluation of epoxy modified open-graded porous asphalt concreteConstruction and Building Materials, 2015
- Laboratory evaluation of stabilizing methods for porous asphalt mixturesConstruction and Building Materials, 2013
- A review of state of the art on stripping phenomenon in asphalt concreteConstruction and Building Materials, 2013
- Laboratory investigation of basic oxygen furnace slag for substitution of aggregate in porous asphalt mixtureConstruction and Building Materials, 2009
- Moisture susceptibility of asphalt mixtures, Part 1: mechanismsInternational Journal of Pavement Engineering, 2008
- Design, Construction, and Maintenance Guidelines for Porous Asphalt PavementsTransportation Research Record: Journal of the Transportation Research Board, 2001