An Invariant-Based Damage Model for Human and Animal Skins
Open Access
- 11 April 2016
- journal article
- research article
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 44 (10) , 3109-3122
Abstract
Constitutive modelling of skins that account for damage effects is important to provide insight for various clinical applications, such as skin trauma and injury, artificial skin design, skin aging, disease diagnosis, surgery, as well as comparative studies of skin biomechanics between species. In this study, a new damage model for human and animal skins is proposed for the first time. The model is nonlinear, anisotropic, invariant-based, and is based on the Gasser–Ogden–Holzapfel constitutive law initially developed for arteries. Taking account of the mean collagen fibre orientation and its dispersion, the new model can describe a wide range of skins with damage. The model is first tested on the uniaxial test data of human skin and then applied to nine groups of uniaxial test data for the human, swine, rabbit, bovine and rhino skins. The material parameters can be inversely estimated based on uniaxial tests using the optimization method in MATLAB with a root mean square error ranged between 2.15% and 12.18%. A sensitivity study confirms that the fibre orientation dispersion and the mean fibre angle are among the most important factors that influence the behaviour of the damage model. In addition, these two parameters can only be reliably estimated if some histological information is provided. We also found that depending on the location of skins, the tissue damage may be brittle controlled by the fibre breaking limit (i.e., when the fibre stretch is greater than 1.13–1.32, depending on the species), or ductile (due to both the fibre and the matrix damages). The brittle damages seem to occur mostly in the back, and the ductile damages are seen from samples taken from the belly. The proposed constitutive model may be applied to various clinical applications that require knowledge of the mechanical response of human and animal skins.Keywords
This publication has 56 references indexed in Scilit:
- Skin Collagen Fiber Molecular Order: A Pattern of Distributional Fiber Orientation as Assessed by Optical Anisotropy and Image AnalysisPLOS ONE, 2013
- Automated Estimation of Collagen Fibre Dispersion in the Dermis and its Contribution to the Anisotropic Behaviour of SkinAnnals of Biomedical Engineering, 2012
- A Parametric Study and Simulations in Quantifying Human Skin Hyperelastic ParametersProcedia Engineering, 2012
- Characterization of the anisotropic mechanical properties of excised human skinJournal of the Mechanical Behavior of Biomedical Materials, 2012
- Modeling failure of soft anisotropic materials with application to arteriesJournal of the Mechanical Behavior of Biomedical Materials, 2011
- Mechanical response of pig skin under dynamic tensile loadingInternational Journal of Impact Engineering, 2011
- Mechanical characterisation of in vivo human skin using a 3D force-sensitive micro-robot and finite element analysisBiomechanics and Modeling in Mechanobiology, 2010
- Measuring the mechanical properties of human skin in vivo using digital image correlation and finite element modellingThe Journal of Strain Analysis for Engineering Design, 2009
- The uniaxial stress versus strain response of pig skin and silicone rubber at low and high strain ratesInternational Journal of Impact Engineering, 2006
- Hyperelastic modelling of arterial layers with distributed collagen fibre orientationsJournal of The Royal Society Interface, 2005