Corrosion Behavior of J55 and N80 Carbon Steels in Simulated Formation Water under Different CO2 Partial Pressures
Open Access
- 26 September 2022
- Vol. 12 (10) , 1402
Abstract
The purpose of this paper is to reveal the corrosion behavior of J55 and N80 carbon steels in formation water under oil wells at different partial pressures, explore the formation process of corrosion product films under supercritical CO2 conditions, and analyze the reasons why the microstructure of carbon steel affects the corrosion behavior. The results show that the corrosion rate gradually increases with the increase in CO2 partial pressure. When the pressure exceeds 10 MPa, the corrosion rate of J55 increases slightly, and that of N80 decreases slightly. Under different partial pressures, the surface composition of the corrosion product film of J55 steel is FeCO3, and that of N80 steel is FeCO3 with a small amount of Fe3C. The analysis shows that the corrosion product films of two kinds of carbon steels can be divided into three layers under the condition of supercritical CO2. There are holes in the middle layer, which are formed first, and then the inner layer and the outer layer are formed at the same time. It is believed that the difference in the morphology and distribution of Fe3C is the reason why the corrosion rate of J55 steel is lower than that of N80 steel. Fe3C in J55 steel is lamellar, which can anchor FeCO3, promote the formation of corrosion product films, and improve the compactness of corrosion product films. However, the Fe3C in N80 is granular and dispersed in the ferrite matrix, which makes it easy to fall off the surface, form pits, and destroy the integrity of the corrosion product film.Keywords
Funding Information
- Basic Research and Strategic Reserve Technology Research of PetroChina Company Limited (Beijing, China) (No. 2018Z–03, No. 2017F–19, No. 00439, No. 2021ZZ01–04)
- Scientific Research and Technology Development Project of PetroChina Company Limited (No. 2018Z–03, No. 2017F–19, No. 00439, No. 2021ZZ01–04)
- Special Support Program for High Level Talents of Shaanxi Province (No. 2018Z–03, No. 2017F–19, No. 00439, No. 2021ZZ01–04)
- Scientific research and technology development project of PetroChina (No. 2018Z–03, No. 2017F–19, No. 00439, No. 2021ZZ01–04)
This publication has 19 references indexed in Scilit:
- Effect of temperature on the critical water content for general and localised corrosion of X65 carbon steel in the transport of supercritical CO2International Journal of Greenhouse Gas Control, 2014
- Discussion of the CO2 corrosion mechanism between low partial pressure and supercritical conditionCorrosion Science, 2012
- The relationship between fracture toughness of CO2 corrosion scale and corrosion rate of X65 pipeline steel under supercritical CO2 conditionInternational Journal of Greenhouse Gas Control, 2011
- Mechanical properties of CO2 corrosion product scales and their relationship to corrosion ratesCorrosion Science, 2008
- Study on corrosion properties of pipelines in simulated produced water saturated with supercritical CO2Applied Surface Science, 2006
- The fracture toughness of CO2 corrosion scale in pipeline steelMaterials Letters, 2005
- Corrosion behavior of oil tube steels under conditions of multiphase flow saturated with super-critical carbon dioxideMaterials Letters, 2004
- The influence of steel microstructure on CO2 corrosion. EIS studies on the inhibition efficiency of benzimidazoleElectrochimica Acta, 2003
- Effect of Steel Microstructure on Corrosion Rate and Protective Iron Carbonate Film FormationCorrosion, 2001
- Role of Conductive Corrosion Products in the Protectiveness of Corrosion LayersCorrosion, 1998