Adaptive Feedback Control for Four-Phase Interleaved Boost Converter Used with PEM Fuel Cell
Open Access
- 29 October 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (21) , 9895
Abstract
Fuel cell electric vehicles (FCEVs) are among the devices that have emerged in recent years. To provide electricity to the electric motors, they use a proton-exchange membrane fuel cell (PEMFC) as the primary energy source and a secondary source consisting of an energy storage system (battery or supercapacitors). The addition of these sources to the motors and accessories of a vehicle requires the association of static converters to condition the different power sources. In addition, a high-efficiency and enhanced-reliability power converter is essential to connect the PEMFC to the vehicle’s DC bus. This paper proposes a robust feedback controller for a four-phase interleaved boost converter used with PEMFC. The proposed controller has double loops based on a state-feedback controller, and an inner loop which translates the differential equation of the system into a state representation by linearization around its operation points. The reference current is generated by state feedback in the outer loop; the state variable is defined by using a change variable. The strong robustness and highly dynamic characteristics of the proposed controller are demonstrated through its performance in terms of output voltage, source current, and settling time. The findings indicate that the proposed controller achieves a response time of 20 ms, resulting in an over improvement compared to the controllers referenced in the literature. Additionally, it reduces both current and voltage ripple, keeping them each below . Further, the controller gains synthesis is validated using the linear quadratic regulator (LQR) technique as well as boundary conditions, and its robustness is verified, taking into account the uncertainty of various operating conditions and discrepancies in circuit components. A double-loop super-twisting sliding mode controller, a backstepping control algorithm, and a PI controller are selected for comparison and discussion. Subsequently, the effectiveness of the proposed controller is evaluated through simulation with the parameters of a 500 W fuel cell system.
Keywords
This publication has 28 references indexed in Scilit:
- Robust control of four-phase interleaved boost converter by considering the performance of PEM fuel cell currentInternational Journal of Hydrogen Energy, 2021
- Polymer electrolyte membrane fuel cell and hydrogen station networks for automobiles: Status, technology, and perspectivesAdvances in Applied Energy, 2021
- Well-to-wheel analysis of energy consumption, greenhouse gas and air pollutants emissions of hydrogen fuel cell vehicle in ChinaJournal of Cleaner Production, 2020
- A robust control of a 4-leg floating interleaved boost converter for fuel cell electric vehicle applicationMathematics and Computers in Simulation, 2020
- Adaptive fuzzy sliding mode command-filtered backstepping control for islanded PV microgrid with energy storage systemJournal of the Franklin Institute, 2019
- Optimization and integration of hybrid renewable energy hydrogen fuel cell energy systems – A critical reviewApplied Energy, 2017
- A DSP-based interleaved boost DC–DC converter for fuel cell applicationsInternational Journal of Hydrogen Energy, 2015
- Static output-feedback controller design for a fish population systemApplied Soft Computing, 2015
- Dynamics of polymer electrolyte fuel cells undergoing load changesElectrochimica Acta, 2006
- Development and application of a generalised steady-state electrochemical model for a PEM fuel cellJournal of Power Sources, 2000