Equivalence of nanoindentations by the load and displacement controlled manners
- 10 August 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Abstract
Nanoindentation experiments have been attracting more attentions to in situ test the mechanical properties of die-attach materials due to the localized loading features. Load controlled manner is usually performed to maintain the indentation strain rate, which results in great challenges for finite element (FE) simulations with the indenter controlled in a displacement manner. In this paper, a validated dimensionless method is adopted to describe the applied load–penetration depth (P–h) curve, where the loading curvature represents the mechanical properties of the materials of interest. Based on a typical FE simulation by using the Berkovich indenter, the relationship between load and displacement controlled methods is investigated. The reaction force on the indenter can be measured from the FE simulations controlled by the applied displacement of the indenter. Meanwhile, the P–h curve of indentations controlled by load can be predicted by the proposed method with the provided loading curvature. As a calibration of the time increment Δt, the calculation results show that the smaller the Δt value is, the influence on the predictions can be ignored. In other words, the predictions of penetration depth can be independent of the Δt value and thus reflect the objective essence of loading process. By taking Δt value as 0.001s for three materials with different constitutive properties, the P–h curves under load and displacement control manners are compared, and excellent agreement is found. The proposed method provides a new and elegant way to realize equivalent load control by displacement control of the indenter for nanoindentation simulations.Keywords
Funding Information
- National Natural Science Foundation of China
- Natural Science Foundation of Shaanxi Province
- Innovation Fund
- Fundamental Research Funds for the Central Universities
This publication has 15 references indexed in Scilit:
- Nanoindentation of hard multilayer coatings: Finite element modellingMaterials Science and Engineering: A, 2011
- CONTINUOUS STIFFNESS MEASUREMENT DURING INSTRUMENTED INDENTATION TESTINGExperimental Techniques, 2010
- INTRODUCTION TO INSTRUMENTED INDENTATION TESTINGExperimental Techniques, 2009
- Finite element simulation of the effect of surface roughness on nanoindentation of thin films with spherical indentersSurface and Coatings Technology, 2007
- Influence of equi-biaxial residual stress on unloading behaviour of nanoindentationActa Materialia, 2005
- Indenter tip radius and load frame compliance calibration using nanoindentation loading curvesPhilosophical Magazine Letters, 1999
- Indentation power-law creep of high-purity indiumMetallurgical and Materials Transactions A, 1999
- Finite-element modeling of nanoindentationJournal of Applied Physics, 1999
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Hardness measurement at penetration depths as small as 20 nmPhilosophical Magazine A, 1983