Influences of Titanium Hydride (TiH2) Content and Holding Temperature in Foamed Pure Aluminum
Authors:
- 11 March 2009
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 24 (5) , 590-593
Abstract
In this study the parameters affecting the foaming process of pure commercial aluminum for preparing of light products are investigated. Titanium hydride (TiH2) powder as a foaming agent (0/5 to 2/5 wt%) added to the aluminum melt. The temperature range of 620 to 660°C was selected. The proper holding temperature and foaming agent content lead to production of foamed aluminum with high porosity percentage and cell structure uniformity. Results show that by adding 1 wt% of TiH2 at foaming temperature of 640°C, cells with 2–6 millimeter in diameter and uniform distribution with 86% porosity are achieved.Keywords
This publication has 7 references indexed in Scilit:
- The mechanical behaviour of aluminium foam structures in different loading conditionsInternational Journal of Impact Engineering, 2008
- Experimental investigation of energy-absorption characteristics of components of sandwich structuresInternational Journal of Impact Engineering, 2007
- Failure mechanisms of closed-cell aluminum foam under monotonic and cyclic loadingActa Materialia, 2006
- Elastic and electric properties of closed-cell aluminum foamsMaterials Science and Engineering: A, 2006
- Improvement of aluminium foam technology by tailoring of blowing agentScripta Materialia, 2006
- Compressive strength of aluminium foamsMaterials Letters, 2004
- Effects of process parameters and alloy compositions on the pore structure of foamed aluminumJournal of Materials Processing Technology, 2003