Research on Insulation Problems Under Multishot Experiments in Electromagnetic Rail Launcher
- 29 May 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 45 (7) , 1353-1360
Abstract
Insulators between conductive rails assume a leading role in electrical insulation and support fixation. Failure of insulating materials during continuous repetitive launches has been found in experiments, the performance changes of insulators will directly affect efficiency and lifetime in repetitive electromagnetic launcher system. Many factors may influence the insulating performance because of complicated working condition, such as strong pulse stress and high temperature. A multishot minor-caliber launcher was designed for the study of the insulating performance. The length of the launcher is 890 mm with a caliber size of 10 mm × 10 mm. C-shaped aluminum alloy armatures and glass-reinforced polymer insulator G10 are used. The muzzle speed is above 2 km/s. After the multishot experiments, the surface topography and surface resistivity of the insulators were measured by megger and digital microscope. The experimental and testing results show that the surface resistivity of G10 reduces gradually with the increase of experiment times, also the surface resistivity of different locations changes. Some pits and cracks appear at individual locations on the G10 surface, the phenomena of resin wear and fiber exposed are observed. Metal deposition is also found on the insulator surface by different types at different positions. Surface flashover voltage is measured after ablation.Keywords
Funding Information
- National Natural Science Foundation of China (51577178, 51237007)
This publication has 9 references indexed in Scilit:
- A Scenario for a Future European Shipboard RailgunIEEE Transactions on Plasma Science, 2015
- Theoretical and Experimental Analysis of Breech Fed and 40-Distributed Energy Stage Plasma Arc RailgunsIEEE Transactions on Plasma Science, 2012
- Investigation Into the Behavior of Armature Ejecta in Electromagnetic LaunchersIEEE Transactions on Plasma Science, 2011
- Progress in Electromagnetic Launch Science and TechnologyIEEE Transactions on Magnetics, 2006
- Electromagnetic launch science and technology in the United States enters a new eraIEEE Transactions on Magnetics, 2005
- Multishot performance of an insulator in a laboratory electromagnetic launcherIEEE Transactions on Magnetics, 2001
- Metallurgical post-mortem analysis of the cannon caliber electromagnetic gun: rails and insulating sidewallsIEEE Transactions on Magnetics, 1997
- Cannon-caliber electromagnetic launcherIEEE Transactions on Magnetics, 1997
- Selection and evaluation of insulator materials for high performance railgun boresIEEE Transactions on Magnetics, 1986