Application of Calcium Carbonate as Green Lubricant Additive in Sheet Metal Forming
Open Access
- 22 July 2022
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 926, 1133-1142
Abstract
The application of calcium carbonate particles as a green lubricant additive for sheet metal forming processes has been evaluated. Different particle sizes were tested, along with different concentrations of particles in a lubricant that typically does not perform well by itself. The lubricant mixtures were tested under pin-on-disc, four-ball, and bending-under-tension test conditions. The results of the different tribological tests were compared to determine whether standard tests, such as the four-ball test, could predict lubricant performance under sheet metal forming conditions. The application of any concentration of particles was shown to be beneficial to the lubricant performance in terms of wear resistance even though friction increased when calcium carbonate particles were added to the base paraffin oil. Small particles (40 nm) exhibited better performance than large particles (2 μm).Keywords
This publication has 14 references indexed in Scilit:
- Tribology of Green Lubricants2013
- Tribological Properties of CaCO3 Nanoparticles as an Additive in Lithium GreaseTribology Letters, 2010
- A Study of Hot Rolling Oil with Calcium Carbonate for Stainless Steel ProcessTribology Online, 2010
- Performance and anti-wear mechanism of CaCO3 nanoparticles as a green additive in poly-alpha-olefinTribology International, 2009
- Lubricant test methods for sheet metal formingTribology International, 2008
- Study on application of CeO2 and CaCO3 nanoparticles in lubricating oilsJournal of Rare Earths, 2008
- Tribological properties study of spherical calcium carbonate composite as lubricant additiveMaterials Letters, 2008
- Bending Under Tension Test with Direct Friction MeasurementProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2006
- Green lubricants. Environmental benefits and impacts of lubricationGreen Chemistry, 2002
- Wear and friction behaviour of CaCO3 nanoparticles used as additives in lubricating oilsLubrication Science, 2000