Decontamination of water polluted with oil through the use of tanned solid wastes
Authors:
- MohammedAzziM. AzziMAMohammedAzziM. Azzi
- 1 September 2007
- journal article
- research article
- Published by Emerald Publishing in Journal of Environmental Engineering and Science
- Vol. 6 (5) , 553-559
Abstract
Sorption by natural organic substrates, inorganic materials or synthetic fibers is one of the most popular methods used for the separation of oily wastes from contaminated water. In this work, the ability of chrome shavings (CS) and of buffing dusts of crust leather (BDCL) to remove motor oils and oily wastes from demineralised water and natural seawater has been studied. Tannery solid wastes are formed mainly by proteins and have a highly organized structure in the form of fibers (ΦΦ: 100 nm). These wastes have a high oil sorption capacity. Tanned solid wastes are capable of absorbing many times their weight in oil (6.5–7.6 and 12.8–14.5 g/g dry substrate, respectively, for ground CS and BDCL). The sorption capacity depends strongly of sorbent nature. The removal of oils from the water surface is a quasi-instantaneous process. After use, the saturated waste floats and can be removed in an efficient and easy manner. The results look fairly promising as to possibilities of using tanned wastes to remove oils from industrial effluents and from contaminated coastal areas.Keywords
This publication has 7 references indexed in Scilit:
- Removal of Dyes from Aqueous Solutions by Adsorption on Chrome-Tanned Solid Wastes Generated in the Leather IndustryWater Quality Research Journal, 2003
- Removal of Hydrocarbons from Wastewater Using Treated BarkJournal of the Air & Waste Management Association, 2001
- Sorption of Monoaromatic Hydrocarbons to WoodEnvironmental Science & Technology, 2000
- Heavy oil sorption using exfoliated graphiteCarbon, 2000
- Absorption of Oil with Cotton Products and KenafApplied Engineering in Agriculture, 1994
- Cotton Nonwovens as Oil Spill Cleanup SorbentsTextile Research Journal, 1993
- Natural sorbents in oil spill cleanupEnvironmental Science & Technology, 1992