Multivariable control of active vibration compensation modules of a portal milling machine
Authors:
- 9 March 2016
- journal article
- review article
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 24 (1) , 3-17
Abstract
The Z-ram of a Portal Milling machine presents a weak point in the dynamic behaviour of the machine tool which makes it prone to the occurrence of chatter vibration. Since chatter vibrations directly limit the maximum allowable cutting depth during machining, an improvement in dynamic behaviour of the machine tools by means of active vibration control of the spindle will result in an increase of maximum cutting depth. An active vibration control of the Tool Center Point of a Portal Milling machine using four hydraulic compensation modules integrated in the Z-ram structure is proposed. A test bench for the Z-ram was constructed at Machine Tools Laboratory (WZL) of RWTH Aachen University and it’s modal analysis revealed the occurring dominant vibration mode. A polyreference-LSCF modal parameter estimation was employed for identification of the measured MIMO Frequency Response Functions (FRF) of the Z-ram test bench. Using this mathematical model, the MIMO controller was synthesized with the Glover-McFarlane [ ] Loop Shaping Design procedure. The implementation of the controller on the test bench resulted in significant improvement in the compliance behaviour of the Z-ram structure. The dynamic compliance at dominant mode of vibration at 75 Hz was reduced by a factor of 3.5. Furthermore, the attenuation of the maximum negative real part resulted in a direct increase in maximum stable depth of cut by a factor of 2.1.Keywords
This publication has 13 references indexed in Scilit:
- The Concept of Active Elimination of Vibrations in Milling ProcessProcedia CIRP, 2015
- Dynamic model of cutting process with modulated spindle speedAIP Conference Proceedings, 2012
- Robust Active Chatter Control in the High-Speed Milling ProcessIEEE Transactions on Control Systems Technology, 2011
- Active Vibration Control for a Machine Tool With Parallel Kinematics and Adaptronic ActuatorJournal of Computational and Nonlinear Dynamics, 2009
- Tool deflection compensation in peripheral milling of curved geometriesInternational Journal of Machine Tools and Manufacture, 2006
- Active integration of tool deflection effects in end milling. Part 1. Prediction of milled surfacesInternational Journal of Machine Tools and Manufacture, 2006
- Werkzeugmaschinen 52006
- The selection of mechanical actuators based on performance indicesProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1997
- A loop-shaping design procedure using H/sub infinity / synthesisIEEE Transactions on Automatic Control, 1992
- Active damping by a local force feedback with piezoelectric actuatorsJournal of Guidance, Control, and Dynamics, 1992