Effect of Surface Nanocrystallization on Corrosion Resistance of the Conformed Cu-0.4%Mg Alloy in NaCl Solution
Open Access
Abstract
Surface nano-crystallization (SNC) of a conform-extruded Cu-0.4 wt.% Mg alloy was successfully conducted by high-speed rotating wire-brushing to obtain the deformed zone with dislocation cells and nanocrystallines. SNC promotes the anodic dissolution and corrosion rate of the Cu-Mg alloy in the initial stage of immersion corrosion in 0.1 M NaCl solution. The weakened corrosion resistance is mainly attributed to the higher corrosion activity of SNC-treated alloy. With extending the immersion time, the SNC-treated alloy slows the corrosion rate dramatically and exhibits uniform dissolution of the surface. The formation of the dense corrosion products leads to the improvement of overall corrosion performance. It indicates that the SNC-treated Cu-Mg alloy can function reliably for a longer duration in a corrosive environment.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (Hohai University) (2016B10314 , 2015B18614)
- Key Research and Development Project of Jiangsu Province of China (BE2017148)
- Public Science & Technology Service Platform Program of Suqian City of China (M201614)
- “Six talent Peak" project of Jiangsu Province (2016-XCL-196)
This publication has 26 references indexed in Scilit:
- Microstructure and properties of the novel Cu–0.30Mg–0.05Ce alloy processed by equal channel angular pressingMaterials Science and Engineering: A, 2015
- Effect of ECAP combined cold working on mechanical properties and electrical conductivity of Conform-produced Cu–Mg alloysJournal of Alloys and Compounds, 2014
- Effects of Cr and Zr additions on the microstructure and properties of Cu–6wt.% Ag alloysMaterials Science and Engineering: A, 2012
- Microstructure and properties of Cu–11Fe–6Ag in situ composite after thermo-mechanical treatmentsJournal of Alloys and Compounds, 2007
- Improvement in strength and electrical conductivity of Cu–Ni–Si alloys by aging and cold rollingJournal of Alloys and Compounds, 2006
- Property and thermal stability of in situ composite Cu–Cr alloy contact cableJournal of Materials Processing Technology, 2005
- Effects of Cr addition on the microstructural, mechanical and electrical characteristics of Cu–6wt.%Ag microcompositeScripta Materialia, 2005
- Precipitation hardening of Cu-Fe-Cr alloys part II Microstructural characterisationJournal of Materials Science, 2001
- Bulk nanostructured materials from severe plastic deformationProgress in Materials Science, 2000
- Softening of nanocrystalline metals at very small grain sizesNature, 1998