Lightning strike damage resistance of carbon‐fiber composites with nanocarbon‐modified epoxy matrices
Open Access
- 30 September 2022
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (46)
Abstract
Carbon‐fiber reinforced polymer (CFRP) composites are replacing metal alloys in aerospace structures, but they can be vulnerable to lightning strike damage if not adequately protected due to the poor electrical conductivity of the polymeric matrix. In the present work, to improve the conductivity of the CFRP, two electrically conductive epoxy formulations were developed via the addition of 0.5 wt% of graphene nanoplatelets (GNPs) and a hybrid of 0.5 wt% of GNPs/carbon nanotubes (CNTs) at an 8:2 mass ratio. Unidirectional CFRP laminates were manufactured using resin‐infusion under flexible tooling (RIFT) and wet lay‐up (WL) processes, and subjected to simulated lightning strike tests. The electrical performance of the RIFT plates was far superior to that of the WL plates, independent of matrix modification, due to their greater carbon‐fiber volume fraction. The GNP‐modified panel made using RIFT demonstrated an electrical conductivity value of 8 S/cm. After the lightning strike test, the CFRP panel remains largely unaffected as no perforation occurs. Damage is limited to matrix degradation within the top ply at the point of impact and localized charring of the surface. The GNP‐modified panel showed a comparable level of resistance against lightning damage with the existing copper mesh technology, offering at the same time a 20% reduction in the structural weight. This indicates a feasible route to improve the lightning strike damage resistance of carbon‐fiber composites without the addition of extra weight, hence reducing fuel consumption but not safety.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/K016792/1)
This publication has 39 references indexed in Scilit:
- Lightning strike damage resistance and tolerance of scarf-repaired mesh-protected carbon fiber compositesComposites Part A: Applied Science and Manufacturing, 2011
- Carbon Fiber–Bismaleimide Composites Filled with Nickel‐Coated Single‐Walled Carbon Nanotubes for Lightning‐Strike ProtectionAdvanced Functional Materials, 2011
- Damage resistance and tolerance of carbon/epoxy composite coupons subjected to simulated lightning strikeComposites Part A: Applied Science and Manufacturing, 2009
- Correlations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon NanotubesAdvanced Functional Materials, 2007
- Glass-fibre-reinforced composites with enhanced mechanical and electrical properties – Benefits and limitations of a nanoparticle modified matrixEngineering Fracture Mechanics, 2006
- Carbon fiber reinforced plastics in aircraft constructionMaterials Science and Engineering: A, 2005
- Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced compositesComposites Part A: Applied Science and Manufacturing, 2005
- Ultra-low electrical percolation threshold in carbon-nanotube-epoxy compositesPolymer, 2003
- Mode I delamination and fibre bridging in carbon-fibre/epoxy composites with and without PVAL coatingComposites Science and Technology, 1993
- Electrical conductivity of coal and coal char☆Fuel, 1977